P151A 2014 GMC Sierra Code - Throttle Actuator Control Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Throttle Actuator Control (TAC) Module, Throttle Actuator Control Module harness is open or shorted, Throttle Actuator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P151A 2014 GMC Sierra indicates Throttle Actuator Control Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Throttle Actuator Control (TAC) Module, Throttle Actuator Control Module harness is open or shorted, Throttle Actuator Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P151A 2014 GMC Sierra Description
What are the Possible Causes of the DTC P151A 2014 GMC Sierra?
- Faulty Throttle Actuator Control (TAC) Module
- Throttle Actuator Control Module harness is open or shorted
- Throttle Actuator Control Module circuit poor electrical connection
How to Fix the DTC P151A 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P151A 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P151A 2014 GMC Sierra code?
Need more information on how to fix the P151A 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P151A 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P151A 2014 GMC Sierra Code
What does the OBDII code P151A mean on a 2014 GMC Sierra?
P151A indicates a problem with the Throttle Actuator Control (TAC) system, specifically an incorrect signal message counter detected by the Engine Control Module (ECM).
What are the common symptoms of code P151A on a GMC Sierra?
Symptoms may include reduced engine performance, activation of the "limp mode," poor throttle response, and an illuminated check engine light.
What causes the P151A code on a 2014 GMC Sierra?
Common causes include faulty wiring or connectors in the throttle actuator circuit, a malfunctioning throttle body, or issues with the ECM sending or receiving incorrect signal counts.
Can a dirty throttle body cause code P151A?
Yes, excessive dirt or carbon buildup on the throttle body can interfere with the actuator's operation and potentially trigger this code.
How can I fix the P151A code on my GMC Sierra?
Begin by inspecting the wiring and connectors for damage or corrosion, cleaning the throttle body, and updating the ECM software if necessary. Replace faulty components as needed.
Is it safe to drive my 2014 GMC Sierra with code P151A?
Driving with this code is not recommended, as it can lead to reduced power or poor throttle control, posing safety risks. Address the issue promptly.
How do I diagnose the cause of code P151A?
Use a diagnostic scanner to monitor live data, inspect the wiring and connectors for damage, and perform tests on the throttle body and actuator for proper operation.
Does the P151A code mean my throttle actuator is broken?
Not necessarily. The issue could stem from wiring problems, software errors, or signal interruptions rather than the actuator itself.
Can a software update fix code P151A on a GMC Sierra?
In some cases, an ECM software update may resolve the issue if the problem is related to incorrect signal processing.
What tools do I need to fix code P151A on a GMC Sierra?
You may need a diagnostic scanner, basic hand tools, a multimeter for testing wiring, and throttle body cleaner for maintenance.
Discuss the causes and fixes for P151A 2014 GMC Sierra OBDII Code
Code P151A 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
