P14B6 2018 GMC Sierra Code - Mass Air Flow Sensor Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P14B6 2018 GMC Sierra indicates Mass Air Flow Sensor Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P14B6 2018 GMC Sierra Description
What are the Possible Causes of the DTC P14B6 2018 GMC Sierra?
- Faulty Mass Air Flow Sensor
- Mass Air Flow Sensor harness is open or shorted
- Mass Air Flow Sensor circuit poor electrical connection
How to Fix the DTC P14B6 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P14B6 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P14B6 2018 GMC Sierra code?
Need more information on how to fix the P14B6 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P14B6 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P14B6 2018 GMC Sierra Code
1. What does the OBDII code P14B6 mean on a 2018 GMC Sierra?
The code P14B6 indicates that the Mass Air Flow (MAF) sensor signal message counter is incorrect, suggesting a communication or data issue between the MAF sensor and the engine control module (ECM).
2. What are the common symptoms of the P14B6 code on a GMC Sierra?
Symptoms may include reduced engine performance, poor fuel economy, rough idling, hesitation during acceleration, or the check engine light being illuminated.
3. What causes the P14B6 code to appear on a 2018 GMC Sierra?
Common causes include a faulty MAF sensor, wiring or connector issues, software glitches in the ECM, or interference in the communication between the MAF sensor and the ECM.
4. Can a dirty air filter cause the P14B6 code to trigger?
A dirty air filter is unlikely to directly cause the P14B6 code, but it can indirectly affect MAF sensor readings, which might lead to related issues.
5. How do I fix the P14B6 code on my GMC Sierra?
Start by inspecting the MAF sensor and its wiring for damage or corrosion. Clean the sensor with MAF cleaner if dirty, check for software updates, and replace the sensor if necessary.
6. Is it safe to drive with the P14B6 code on my 2018 GMC Sierra?
While the truck may still be drivable, it’s not recommended to ignore the code, as it can lead to decreased performance and further engine damage if unresolved.
7. How much does it cost to repair the P14B6 code?
Repair costs can vary, but replacing a faulty MAF sensor typically costs between $100 and $300, including parts and labor.
8. How can I prevent the P14B6 code from recurring?
Regularly maintain your air intake system, ensure the MAF sensor is clean, and address wiring or connector issues promptly to avoid signal disruptions.
9. Can I clear the P14B6 code without fixing the issue?
You can clear the code with an OBDII scanner, but it will likely return if the underlying problem is not resolved.
10. Do I need a professional mechanic to fix the P14B6 code?
While some basic troubleshooting like cleaning the MAF sensor can be done at home, diagnosing and repairing wiring or ECM communication issues may require professional expertise.
Discuss the causes and fixes for P14B6 2018 GMC Sierra OBDII Code
Code P14B6 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
