P14B6 2016 GMC Sierra Code - Mass Air Flow Sensor Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P14B6 2016 GMC Sierra indicates Mass Air Flow Sensor Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P14B6 2016 GMC Sierra Description
What are the Possible Causes of the DTC P14B6 2016 GMC Sierra?
- Faulty Mass Air Flow Sensor
- Mass Air Flow Sensor harness is open or shorted
- Mass Air Flow Sensor circuit poor electrical connection
How to Fix the DTC P14B6 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P14B6 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P14B6 2016 GMC Sierra code?
Need more information on how to fix the P14B6 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P14B6 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P14B6 2016 GMC Sierra Code
1. What does the OBDII code P14B6 mean on a 2016 GMC Sierra?
P14B6 indicates that the Mass Air Flow (MAF) sensor signal message counter is incorrect, which means the Engine Control Module (ECM) is detecting an inconsistency in the MAF sensor data communication.
2. What are the common symptoms of code P14B6 in a 2016 GMC Sierra?
Common symptoms include reduced engine performance, poor fuel economy, rough idling, and possibly an illuminated check engine light.
3. What causes the P14B6 code to appear on a GMC Sierra?
The code can be caused by a faulty MAF sensor, wiring or connection issues in the MAF circuit, ECM software errors, or problems with the CAN (Controller Area Network) communication.
4. How can I diagnose the P14B6 code in my 2016 GMC Sierra?
Begin by checking the MAF sensor wiring and connectors for damage or corrosion. Inspect the sensor for dirt or debris and verify proper voltage and data signal using a multimeter or scan tool.
5. Can a dirty air filter trigger the P14B6 code?
While a dirty air filter can restrict airflow and affect MAF readings, it typically won't directly cause the P14B6 code. However, it's still a good idea to inspect and replace the air filter if necessary.
6. Is it safe to drive my GMC Sierra with the P14B6 code?
Driving with this code may lead to reduced engine performance and potentially cause further damage over time. It’s best to address the issue promptly to avoid complications.
7. How do I fix the P14B6 code on my 2016 GMC Sierra?
Repairs may include cleaning or replacing the MAF sensor, repairing damaged wiring or connectors, updating the ECM software, or addressing communication issues in the vehicle's network.
8. How much does it cost to fix the P14B6 code?
The cost depends on the root cause. Cleaning the MAF sensor may cost little to nothing, while replacing the sensor or repairing wiring can range from $100 to $400. ECM updates may require additional labor charges.
9. Can a bad MAF sensor cause other engine issues?
Yes, a faulty MAF sensor can cause improper air-fuel mixture readings, leading to misfires, stalling, or other performance problems.
10. How can I prevent the P14B6 code from occurring again?
Regularly inspect and clean the MAF sensor, replace the air filter as needed, and ensure the electrical connections and wiring remain in good condition.
Discuss the causes and fixes for P14B6 2016 GMC Sierra OBDII Code
Code P14B6 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
