P1499 Subaru Code - EGR Signal Line 4 Circuit High
Quick Answer
P1499 Subaru indicates EGR Signal Line 4 Circuit High. Common causes include Faulty EGR Valve, EGR Valve harness is open or shorted, EGR Valve poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1499 Subaru indicates EGR Signal Line 4 Circuit High.
- Common causes
- Common causes include Faulty EGR Valve, EGR Valve harness is open or shorted, EGR Valve poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P1499 Subaru Description
What are the Possible Causes of the DTC P1499 Subaru?
- Faulty EGR Valve
- EGR Valve harness is open or shorted
- EGR Valve poor electrical connection
How to Fix the DTC P1499 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1499 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1499 Subaru code?
Need more information on how to fix the P1499 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1499 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1499 Subaru Code
1. What does the OBDII code P1499 mean on a Subaru?
P1499 indicates a problem with the EGR (Exhaust Gas Recirculation) Signal Line 4 Circuit, specifically a high voltage issue.
2. What are the common symptoms of code P1499 in a Subaru?
Typical symptoms include an illuminated check engine light, rough idling, decreased fuel efficiency, and possible engine hesitation or stalling.
3. What causes the P1499 code to appear?
Common causes include a faulty EGR valve, a damaged or shorted EGR signal line, a malfunctioning EGR sensor, or poor electrical connections in the circuit.
4. How can I diagnose the P1499 code on my Subaru?
Start by inspecting the EGR valve, wiring, and connectors for damage or corrosion. Use a multimeter to check for voltage irregularities in the EGR signal line.
5. Can I still drive my Subaru with a P1499 code?
Driving with a P1499 code is not recommended, as it can lead to reduced engine performance and potential long-term damage to the engine or emissions system.
6. How can I fix the P1499 code on my Subaru?
Repairs may include replacing the EGR valve, repairing or replacing damaged wiring, cleaning the EGR passages, or replacing the EGR sensor if it's faulty.
7. How much does it cost to fix a P1499 code?
Repair costs vary, but replacing an EGR valve typically ranges from $150 to $400, including parts and labor, depending on your location and vehicle model.
8. Can a dirty EGR valve cause the P1499 code?
Yes, a clogged or dirty EGR valve can cause improper function and trigger the P1499 code.
9. Will clearing the P1499 code solve the problem?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be resolved to prevent the code from returning.
10. Is the P1499 code specific to Subaru vehicles?
While P1499 is most commonly associated with Subaru vehicles, the specific meaning and repair process may vary by manufacturer. Always refer to your vehicle’s service manual.
Discuss the causes and fixes for P1499 Subaru OBDII Code
Code P1499 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
