AutoCodesAcura – P1498 Acura

P1498 Acura Code - Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage

Quick Answer

P1498 Acura indicates Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage. Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, EGR Valve harness is open or shorted, EGR Valve poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P1498 Acura indicates Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage.
Common causes
Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, EGR Valve harness is open or shorted, EGR Valve poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,785
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 25, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1498 Acura Description

OBDII Code P1498 Acura - Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage - AutoCodes.com
P1498 Acura Code - Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage

What are the Possible Causes of the DTC P1498 Acura?

  • Faulty Exhaust Gas Recirculation (EGR) Valve
  • EGR Valve harness is open or shorted
  • EGR Valve poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P1498 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1498 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1498 Acura code?

Need more information on how to fix the P1498 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1498 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1498 Acura Code

1. What does the OBDII code P1498 mean on an Acura?

P1498 indicates an issue with the Exhaust Gas Recirculation (EGR) Valve Position Sensor Circuit, specifically detecting a high voltage reading.

2. What are the symptoms of code P1498 in an Acura?

Common symptoms include the check engine light turning on, reduced engine performance, rough idling, poor fuel economy, or increased emissions.

3. What causes the P1498 code to appear in an Acura?

Possible causes include a faulty EGR valve position sensor, damaged wiring or connectors, a malfunctioning EGR valve, or issues in the engine control module (ECM).

4. Can I drive my Acura with a P1498 code?

While it may still be drivable, ignoring the code can lead to reduced performance, higher emissions, and potential long-term damage to the engine.

5. How do I diagnose the P1498 code on my Acura?

Use an OBDII scanner to confirm the code, then inspect the EGR valve position sensor, wiring, and connectors for damage or corrosion.

6. How can I fix the P1498 code on my Acura?

Repairs may involve replacing the EGR valve position sensor, repairing damaged wiring, cleaning the EGR valve, or updating/reprogramming the ECM if necessary.

7. How much does it cost to fix the P1498 code on an Acura?

The cost varies depending on the repair, but replacing the EGR valve position sensor typically costs $150–$300, including parts and labor.

8. Can a dirty EGR valve cause the P1498 code?

Yes, a dirty or clogged EGR valve can cause improper readings, potentially triggering the P1498 code.

9. How can I prevent the P1498 code from recurring in my Acura?

Regular maintenance, including cleaning the EGR valve and inspecting the sensor and wiring, can help prevent the code from reappearing.

10. Will clearing the P1498 code with a scanner fix the issue?

Clearing the code may turn off the check engine light temporarily, but the underlying issue must be resolved to prevent it from returning.

Discuss the causes and fixes for P1498 Acura OBDII Code

Code P1498 Acura comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play