AutoCodes – Honda – P1498 1999 Honda Civic

P1498 1999 Honda Civic Code - Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage

Quick Answer

P1498 1999 Honda Civic indicates Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage. Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, EGR Valve harness is open or shorted, EGR Valve poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P1498 1999 Honda Civic indicates Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage.
Common causes: Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, EGR Valve harness is open or shorted, EGR Valve poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,943

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 25, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1498 1999 Honda Civic Description

OBDII Code P1498 1999 Honda Civic - Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage - AutoCodes.com — P1498 1999 Honda Civic Code - Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P1498 1999 Honda Civic?

Faulty Exhaust Gas Recirculation (EGR) Valve
EGR Valve harness is open or shorted
EGR Valve poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P1498 1999 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1498 1999 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1498 1999 Honda Civic code?

Need more information on how to fix the P1498 1999 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1498 1999 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1498 1999 Honda Civic Code

1. What are common symptoms of OBDII code P1498 in a 1999 Honda Civic?

- Common symptoms include rough idling, engine stalling, decreased fuel efficiency, and the illumination of the Check Engine light.

2. What causes the OBDII code P1498 in a 1999 Honda Civic?

- The primary cause of P1498 is usually a malfunctioning Exhaust Gas Recirculation (EGR) valve position sensor or issues with the sensor circuit high voltage.

3. How can I diagnose the OBDII code P1498 in my 1999 Honda Civic?

- Diagnosing P1498 involves checking the EGR valve position sensor for proper operation, inspecting the sensor wiring for damage, and testing the sensor circuit for high voltage.

4. Can a faulty EGR valve cause the OBDII code P1498 in a 1999 Honda Civic?

- Yes, a faulty EGR valve or issues with the EGR system can trigger the P1498 code due to the sensor circuit detecting high voltage.

5. What are some repair tips for fixing the OBDII code P1498 in a 1999 Honda Civic?

- Repair tips include cleaning the EGR valve, checking and repairing any damaged wiring, replacing the EGR valve position sensor if necessary, and clearing the code to see if the issue is resolved.

6. Is it safe to continue driving with the OBDII code P1498 in a 1999 Honda Civic?

- While the vehicle may still be operational with the P1498 code, it is recommended to address the issue promptly to prevent further damage and ensure optimal engine performance.

7. Can I reset the Check Engine light after fixing the OBDII code P1498 in my 1999 Honda Civic?

- Yes, once the underlying issue causing the P1498 code is resolved, you can reset the Check Engine light using an OBDII scanner or by disconnecting the car's battery for a few minutes.

8. Are there any recalls related to the OBDII code P1498 in a 1999 Honda Civic?

- There are no specific recalls related to the P1498 code in the 1999 Honda Civic, but it's always advisable to check with the manufacturer or a Honda dealership for any updates.

9. How much does it typically cost to repair the OBDII code P1498 in a 1999 Honda Civic?

- Repair costs for the P1498 code can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

10. Will fixing the OBDII code P1498 improve the overall performance of my 1999 Honda Civic?

- Yes, addressing the P1498 code and ensuring the proper functioning of the EGR system can lead to improved engine performance, fuel efficiency, and smoother operation of the vehicle.