AutoCodes – Honda – P1498 1997 Honda Civic

P1498 1997 Honda Civic Code - Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage

Quick Answer

P1498 1997 Honda Civic indicates Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage. Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, EGR Valve harness is open or shorted, EGR Valve poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P1498 1997 Honda Civic indicates Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage.
Common causes: Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, EGR Valve harness is open or shorted, EGR Valve poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,194

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 25, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1498 1997 Honda Civic Description

OBDII Code P1498 1997 Honda Civic - Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage - AutoCodes.com — P1498 1997 Honda Civic Code - Exhaust Gas Recirculation Valve Position Sensor Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P1498 1997 Honda Civic?

Faulty Exhaust Gas Recirculation (EGR) Valve
EGR Valve harness is open or shorted
EGR Valve poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P1498 1997 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1498 1997 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1498 1997 Honda Civic code?

Need more information on how to fix the P1498 1997 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1498 1997 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1498 1997 Honda Civic Code

1. What are the common symptoms of OBDII code P1498 in a 1997 Honda Civic?

- Common symptoms include rough idling, engine hesitation, decreased fuel efficiency, and potential stalling.

2. What does the OBDII code P1498 in a 1997 Honda Civic indicate?

- This code indicates a high voltage condition in the Exhaust Gas Recirculation (EGR) Valve Position Sensor circuit.

3. What are the possible causes of code P1498 in a 1997 Honda Civic?

- Possible causes include a faulty EGR valve position sensor, damaged wiring or connectors in the circuit, or a problem with the EGR valve itself.

4. How can I diagnose the cause of OBDII code P1498 in my 1997 Honda Civic?

- Diagnosing this code typically involves checking the EGR valve position sensor's voltage readings, inspecting the wiring and connectors for damage, and testing the EGR valve's functionality.

5. Can I still drive my 1997 Honda Civic with OBDII code P1498 present?

- It is not recommended to drive your vehicle with this code present, as it can lead to engine performance issues and potential damage if left unresolved.

6. How can I repair OBDII code P1498 in my 1997 Honda Civic?

- Repair options may include replacing the EGR valve position sensor, repairing damaged wiring or connectors, or replacing the EGR valve if necessary.

7. Is it possible to reset OBDII code P1498 in a 1997 Honda Civic without fixing the underlying issue?

- While you can reset the code using an OBDII scanner, it will likely reappear if the underlying issue causing the high voltage condition is not resolved.

8. Are there any DIY tips for fixing OBDII code P1498 in a 1997 Honda Civic?

- DIY tips may include checking and cleaning the EGR valve, inspecting the sensor circuit for loose connections, and ensuring proper voltage supply to the sensor.

9. How much does it cost to repair OBDII code P1498 in a 1997 Honda Civic at a mechanic?

- The cost of repair can vary depending on the exact cause of the code, but it may range from $100 to $300 for parts and labor.

10. Can a faulty EGR valve position sensor cause other issues in a 1997 Honda Civic besides triggering code P1498?

- Yes, a faulty EGR valve position sensor can cause poor engine performance, increased emissions, and potential damage to other engine components if not addressed promptly.