AutoCodes – Subaru – P1493 Subaru

P1493 Subaru Code - EGR Signal Line 1 Circuit High

Quick Answer

P1493 Subaru indicates EGR Signal Line 1 Circuit High. Common causes include Faulty EGR valve, EGR valve harness is open or shorted, EGR valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P1493 Subaru indicates EGR Signal Line 1 Circuit High.
Common causes
Common causes include Faulty EGR valve, EGR valve harness is open or shorted, EGR valve circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,798
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 25, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1493 Subaru Description

OBDII Code P1493 Subaru - EGR Signal Line 1 Circuit High - AutoCodes.com
P1493 Subaru Code - EGR Signal Line 1 Circuit High

What are the Possible Causes of the DTC P1493 Subaru?

  • Faulty EGR valve
  • EGR valve harness is open or shorted
  • EGR valve circuit poor electrical connection

How to Fix the DTC P1493 Subaru?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1493 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1493 Subaru code?

Need more information on how to fix the P1493 Subaru code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1493 Subaru code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1493 Subaru Code

1. What does the OBDII code P1493 mean on a Subaru?

P1493 indicates an issue with the EGR (Exhaust Gas Recirculation) Signal Line 1 Circuit, specifically that the signal voltage is higher than expected.

2. What are the common symptoms of the P1493 code on a Subaru?

Symptoms may include the check engine light turning on, rough idling, reduced fuel efficiency, and possible engine hesitation during acceleration.

3. What causes the P1493 code to appear on a Subaru?

Common causes include a faulty EGR valve, wiring issues such as damaged or corroded connections, a defective EGR sensor, or a problem with the engine control unit (ECU).

4. Can I continue driving my Subaru with the P1493 code?

While the car may still be drivable, ignoring the P1493 code can lead to reduced performance, increased emissions, and potential damage to other engine components over time.

5. How do I fix the P1493 code on my Subaru?

Repairs may involve inspecting and repairing wiring or connectors, cleaning or replacing the EGR valve, replacing the EGR sensor, or reprogramming or replacing the ECU if necessary.

6. How do I diagnose the P1493 code on a Subaru?

Start by using an OBDII scanner to confirm the code, then visually inspect the EGR system, check wiring and connectors, and test the EGR sensor and valve using a multimeter or diagnostic tools.

7. What tools do I need to fix the P1493 code?

You will typically need an OBDII scanner, a multimeter, basic hand tools, and possibly specialty tools for EGR valve removal and testing.

8. How much does it cost to repair the P1493 code on a Subaru?

Repair costs can vary depending on the issue, ranging from $50-$150 for cleaning or minor repairs to $300-$600 or more for part replacements or ECU work.

9. Can a dirty EGR valve cause the P1493 code?

Yes, a dirty or clogged EGR valve can hinder proper operation and trigger the P1493 code due to abnormal signal readings.

10. Is the P1493 code related to emissions problems?

Yes, the EGR system plays a critical role in reducing emissions. A fault in this circuit can lead to higher nitrogen oxide (NOx) emissions.

Discuss the causes and fixes for P1493 Subaru OBDII Code

Code P1493 Subaru comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play