AutoCodes – Acura – P1491 Acura

P1491 Acura Code - Exhaust Gas Recirculation Valve Insufficient Lift

Quick Answer

The Exhaust Gas Recirculation (EGR) system reduces Oxides of Nitrogen (NOx). Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Exhaust Gas Recirculation Valve harness is open or shorted, Exhaust Gas Recirculation Valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P1491 Acura indicates Exhaust Gas Recirculation Valve Insufficient Lift.
Common causes: Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Exhaust Gas Recirculation Valve harness is open or shorted, Exhaust Gas Recirculation Valve circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 25,020

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 03, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1491 Acura Description

The Exhaust Gas Recirculation (EGR) system reduces Oxides of Nitrogen (NOx). NOx is generated by high combustion temperatures.
The EGR system lowers peak combustion temperature by recirculating inactive exhaust gas into the air/fuel mixture, thus reducing NOx emissions.
The EGR valve position sensor is built into the EGR valve and detects the amount of valve lift. The command value for the target valve lift is previously stored in the Powertrain Control Module (PCM) so that exhaust gas recirculation can be optimized according to driving conditions.
Comparing this command value with the EGR valve position sensor output signal value, the PCM controls the EGR valve to make the amount of actual valve lift equal to the command value.
If the EGR valve position sensor output signal value differs greatly from the command value in the PCM memory for a set period of time, the EGR valve or the EGR valve position sensor is considered faulty and a DTC is stored.

OBDII Code P1491 Acura - Exhaust Gas Recirculation Valve Insufficient Lift - AutoCodes.com — P1491 Acura Code - Exhaust Gas Recirculation Valve Insufficient Lift

What does this mean?

What are the Possible Causes of the DTC P1491 Acura?

Faulty Exhaust Gas Recirculation (EGR) Valve
Exhaust Gas Recirculation Valve harness is open or shorted
Exhaust Gas Recirculation Valve circuit poor electrical connection
Exhaust Gas Recirculation Valve clogged
Exhaust gas leaks

How to Fix the DTC P1491 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

EGR flow malfunction could be caused by a clogged EGR valve or EGR tube. Before replacing any parts try cleaning the EGR valve, tube and passages.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1491 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1491 Acura code?

Need more information on how to fix the P1491 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1491 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.