AutoCodesCadillac – P1490 Cadillac

P1490 Cadillac Code - EVAP Purge Pump Voltage Sensor Performance

Quick Answer

Purge capacity is being reduced by technologies that improve fuel economy. Common causes include Faulty Evaporative Emission Purge Pump, Evaporative Emission Purge Pump harness is open or shorted, Evaporative Emission Purge Pump circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1490 Cadillac indicates EVAP Purge Pump Voltage Sensor Performance.
Common causes
Common causes include Faulty Evaporative Emission Purge Pump, Evaporative Emission Purge Pump harness is open or shorted, Evaporative Emission Purge Pump circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 287
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 18, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1490 Cadillac Description

Purge capacity is being reduced by technologies that improve fuel economy. The Evaporative Emission Purge Pump is used to purge stored vapors from the Evaporative Emission Canister and is required to increase the purge volumes to meet LEV 3 Evaporative Emission requirements. The Evaporative Emission Purge Pump has an integral pressure sensor for controlling purge vapors from the canister. The Engine Control Module (ECM) monitors the Evaporative Emission Purge Pump, and the Diagnostic Trouble Code (DTC) will be set when the EVAP Purge Pump Voltage and Ignition Voltage are not within 2.0 V of each other for greater than 1 s.
OBDII Code P1490 Cadillac - EVAP Purge Pump Voltage Sensor Performance - AutoCodes.com
P1490 Cadillac Code - EVAP Purge Pump Voltage Sensor Performance

What are the Possible Causes of the DTC P1490 Cadillac?

  • Faulty Evaporative Emission Purge Pump
  • Evaporative Emission Purge Pump harness is open or shorted
  • Evaporative Emission Purge Pump circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P1490 Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1490 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1490 Cadillac code?

Need more information on how to fix the P1490 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1490 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1490 Cadillac Code

1. What does the OBDII code P1490 mean on a Cadillac?

P1490 indicates an issue with the EVAP (Evaporative Emission Control) purge pump voltage sensor, suggesting it isn't performing within the expected range.

2. What are the common symptoms of code P1490 in a Cadillac?

Symptoms may include an illuminated check engine light, poor fuel efficiency, difficulty starting the engine, or a slight fuel odor near the vehicle.

3. What causes the P1490 code to appear on a Cadillac?

Common causes include a faulty EVAP purge pump, damaged wiring or connectors, a malfunctioning purge pump voltage sensor, or a problem with the vehicle's PCM (Powertrain Control Module).

4. Can I drive my Cadillac with a P1490 code?

While the vehicle might still drive, it’s not recommended to ignore the code, as it indicates an emissions issue that can affect performance and may lead to more severe problems.

5. How is the P1490 code diagnosed in a Cadillac?

A technician will use an OBDII scanner to confirm the code, inspect the EVAP purge pump and related wiring, and test the voltage sensor for proper operation.

6. How can I fix the P1490 code on my Cadillac?

Repairs may involve replacing the EVAP purge pump, repairing or replacing damaged wiring, cleaning or replacing the sensor, or reprogramming the PCM if necessary.

7. What tools are needed to troubleshoot the P1490 code?

Basic tools include an OBDII scanner, a multimeter to test electrical connections, and potentially a smoke machine to check for EVAP system leaks.

8. How much does it cost to repair a P1490 code on a Cadillac?

Repair costs vary but typically range from $150 to $400, depending on whether the issue is with the sensor, wiring, or the purge pump itself.

9. Can a loose gas cap cause the P1490 code on a Cadillac?

No, a loose gas cap typically triggers a different EVAP system code, not P1490. This code is specific to the purge pump voltage sensor.

10. Will clearing the P1490 code solve the problem?

Clearing the code may turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for P1490 Cadillac OBDII Code

Code P1490 Cadillac comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play