P148F 2019 GMC Sierra Code - EVAP Purge Pump Voltage Sensor High Voltage
Quick Answer
Purge capacity is being reduced by technologies that improve fuel economy. Common causes include Faulty Evaporative Emission Purge Pump, Evaporative Emission Purge Pump harness is open or shorted, Evaporative Emission Purge Pump circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P148F 2019 GMC Sierra indicates EVAP Purge Pump Voltage Sensor High Voltage.
- Common causes
- Common causes include Faulty Evaporative Emission Purge Pump, Evaporative Emission Purge Pump harness is open or shorted, Evaporative Emission Purge Pump circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P148F 2019 GMC Sierra Description
What are the Possible Causes of the DTC P148F 2019 GMC Sierra?
- Faulty Evaporative Emission Purge Pump
- Evaporative Emission Purge Pump harness is open or shorted
- Evaporative Emission Purge Pump circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P148F 2019 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P148F 2019 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P148F 2019 GMC Sierra code?
Need more information on how to fix the P148F 2019 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P148F 2019 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P148F 2019 GMC Sierra Code
1. What does the OBDII code P148F mean on a 2019 GMC Sierra?
The P148F code indicates "EVAP Purge Pump Voltage Sensor High Voltage," meaning the ECM has detected an abnormally high voltage signal from the EVAP purge pump voltage sensor.
2. What are the common symptoms of code P148F on a 2019 GMC Sierra?
Common symptoms include an illuminated check engine light, poor fuel efficiency, difficulty starting the engine, and a faint fuel odor near the vehicle.
3. What causes the P148F code to appear on a 2019 GMC Sierra?
Possible causes include a faulty EVAP purge pump, damaged wiring or connectors, a defective voltage sensor, or issues with the ECM.
4. Can you drive a 2019 GMC Sierra with the P148F code?
While it may still be drivable, ignoring the issue can lead to increased emissions, reduced fuel economy, and potential damage to the EVAP system.
5. How can I diagnose the P148F code on my 2019 GMC Sierra?
Use an OBDII scanner to confirm the code, inspect the EVAP purge pump and its wiring for damage, and test the voltage sensor for proper functionality.
6. How do I fix the P148F code on a 2019 GMC Sierra?
Repairs may include replacing the EVAP purge pump, repairing or replacing damaged wiring or connectors, or replacing the voltage sensor if faulty.
7. What tools are needed to fix the P148F code on a 2019 GMC Sierra?
Basic tools include an OBDII scanner, a multimeter for voltage testing, and appropriate hand tools for inspecting and replacing components.
8. Is the P148F code covered under warranty for a 2019 GMC Sierra?
It depends on your vehicle’s warranty coverage. If your powertrain or emissions warranty is still active, this issue may be covered.
9. How much does it cost to repair the P148F code on a 2019 GMC Sierra?
Costs vary but typically range from $150 to $400, depending on whether the EVAP purge pump or related components need replacement.
10. Can a P148F code cause the 2019 GMC Sierra to fail an emissions test?
Yes, this code indicates an issue with the EVAP system, which can lead to increased emissions and result in a failed emissions test.
Discuss the causes and fixes for P148F 2019 GMC Sierra OBDII Code
Code P148F 2019 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
