AutoCodes – Cadillac – P148E Cadillac

P148E Cadillac Code - EVAP Purge Pump Voltage Sensor Low Voltage

Quick Answer

Purge capacity is being reduced by technologies that improve fuel economy. Common causes include Faulty Evaporative Emission Purge Pump, Evaporative Emission Purge Pump harness is open or shorted, Evaporative Emission Purge Pump circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P148E Cadillac indicates EVAP Purge Pump Voltage Sensor Low Voltage.
Common causes
Common causes include Faulty Evaporative Emission Purge Pump, Evaporative Emission Purge Pump harness is open or shorted, Evaporative Emission Purge Pump circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 312
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 18, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P148E Cadillac Description

Purge capacity is being reduced by technologies that improve fuel economy. The Evaporative Emission Purge Pump is used to purge stored vapors from the Evaporative Emission Canister and is required to increase the purge volumes to meet LEV 3 Evaporative Emission requirements. The Evaporative Emission Purge Pump has an integral pressure sensor for controlling purge vapors from the canister. The Engine Control Module (ECM) monitors the Evaporative Emission Purge Pump, and the Diagnostic Trouble Code (DTC) will be set when the EVAP Purge Pump Voltage is less than 3.5 V for greater than 1 s.
OBDII Code P148E Cadillac - EVAP Purge Pump Voltage Sensor Low Voltage - AutoCodes.com
P148E Cadillac Code - EVAP Purge Pump Voltage Sensor Low Voltage

What are the Possible Causes of the DTC P148E Cadillac?

  • Faulty Evaporative Emission Purge Pump
  • Evaporative Emission Purge Pump harness is open or shorted
  • Evaporative Emission Purge Pump circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P148E Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P148E Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P148E Cadillac code?

Need more information on how to fix the P148E Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P148E Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P148E Cadillac Code

1. What does the OBDII code P148E mean on a Cadillac?

P148E indicates that the EVAP purge pump voltage sensor is detecting a low voltage condition, which is part of the vehicle's evaporative emissions control system.

2. What are the symptoms of the P148E code?

Common symptoms include an illuminated check engine light, reduced fuel efficiency, noticeable fuel odor, and potential difficulty starting the vehicle.

3. What causes the P148E code to appear?

This code can be triggered by a faulty EVAP purge pump, damaged wiring or connectors, a malfunctioning voltage sensor, or issues with the powertrain control module (PCM).

4. Can I drive my Cadillac with the P148E code?

While the car may still be drivable, ignoring the issue can lead to increased emissions, reduced fuel economy, and potential damage to other components over time.

5. How do I diagnose the P148E code?

Diagnosis involves using a scan tool to confirm the code, inspecting the EVAP purge pump and its wiring for damage, and testing the voltage sensor for proper operation.

6. How can I fix the P148E code on my Cadillac?

Repairs may include replacing the EVAP purge pump, repairing or replacing damaged wiring or connectors, or replacing the voltage sensor if it's faulty.

7. How much does it cost to repair the P148E code?

Repair costs can vary, but replacing an EVAP purge pump typically ranges from $200 to $400, including parts and labor.

8. Can a loose gas cap cause the P148E code?

No, a loose gas cap usually triggers different EVAP-related codes such as P0455 or P0456, not P148E.

9. Will clearing the code fix the P148E issue?

Clearing the code may turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.

10. Does the P148E code affect emissions testing?

Yes, the P148E code will cause your vehicle to fail an emissions test due to the malfunction in the EVAP system.

Discuss the causes and fixes for P148E Cadillac OBDII Code

Code P148E Cadillac comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play