AutoCodes – Dodge – P1486 Dodge

P1486 Dodge Code - EVAP System Pinched Hose Found

Quick Answer

The Evaporative emissions system is design to prevent the escape of fuel vapors from the fuel system. Common causes include Leak Detection Pump (LDP) pressure hose obstructed, Faulty Leak Detection Pump (LDP), Obstructed hose. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1486 Dodge indicates EVAP System Pinched Hose Found.
Common causes: Common causes include Leak Detection Pump (LDP) pressure hose obstructed, Faulty Leak Detection Pump (LDP), Obstructed hose.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 20,050

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 24, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1486 Dodge Description

The Evaporative emissions system is design to prevent the escape of fuel vapors from the fuel system. Leaks in the system, ca allow vapors to escape into the atmosphere. The leak detection system tests for EVAP system leaks and blockage.
During the self-diagnostics, the Powertrain Control Module (PCM) first checks the Leak Detection Pump (LDP) for electrical and mechanical faults. If the first checks pass, the PCM then uses the LDP to seal the vent valve and pump air into the system to pressurize it. If a leak is present, the PCM will continue pumping the LDP to replace the air that leaks out. The PCM determines the size of the leak based on how fast/long it must pump the LDP as it tries to maintain pressure in the system.

OBDII Code P1486 Dodge - EVAP System Pinched Hose Found - AutoCodes.com — P1486 Dodge Code - EVAP System Pinched Hose Found

What does this mean?

What are the Possible Causes of the DTC P1486 Dodge?

Leak Detection Pump (LDP) pressure hose obstructed
Faulty Leak Detection Pump (LDP)
Obstructed hose
EVAP canister obstructed

How to Fix the DTC P1486 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1486 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1486 Dodge code?

Need more information on how to fix the P1486 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1486 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.