P1460 2009 Ford Fusion Code - Wide Open Throttle Air Conditioning Cutoff Circuit Malfunction
Quick Answer
The Powertrain Control Module (PCM) monitors the Wide Open Throttle A/C Cut-Off (WAC) circuit. Common causes include Faulty Wide Open Throttle A/C Cutoff (WAC) Relay, Wide Open Throttle A/C Cutoff Relay harness is open or shorted, Wide Open Throttle A/C Cutoff Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1460 2009 Ford Fusion indicates Wide Open Throttle Air Conditioning Cutoff Circuit Malfunction.
- Common causes
- Common causes include Faulty Wide Open Throttle A/C Cutoff (WAC) Relay, Wide Open Throttle A/C Cutoff Relay harness is open or shorted, Wide Open Throttle A/C Cutoff Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1460 2009 Ford Fusion Description
What are the Possible Causes of the DTC P1460 2009 Ford Fusion?
- Faulty Wide Open Throttle A/C Cutoff (WAC) Relay
- Wide Open Throttle A/C Cutoff Relay harness is open or shorted
- Wide Open Throttle A/C Cutoff Relay circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P1460 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1460 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1460 2009 Ford Fusion code?
Need more information on how to fix the P1460 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1460 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1460 2009 Ford Fusion Code
1. What does the OBDII code P1460 mean on a 2009 Ford Fusion?
P1460 indicates a malfunction in the Wide Open Throttle (WOT) Air Conditioning Cutoff Circuit, which is responsible for disabling the A/C under heavy acceleration.
2. What are the symptoms of the P1460 code in a 2009 Ford Fusion?
Common symptoms include reduced A/C performance, the A/C not turning off during acceleration, or the Check Engine Light being illuminated.
3. What causes the P1460 code to appear in a 2009 Ford Fusion?
The most common causes are a faulty WOT A/C cutoff relay, damaged wiring, corroded electrical connections, or a malfunctioning Powertrain Control Module (PCM).
4. Can I still drive my 2009 Ford Fusion with the P1460 code?
Yes, you can drive the vehicle, but you may experience reduced A/C efficiency or performance issues during heavy acceleration.
5. How do I diagnose the P1460 code on my 2009 Ford Fusion?
Start by inspecting the WOT A/C cutoff relay, wiring, and connectors for damage or corrosion. Use a scan tool to check for related codes and perform electrical tests on the circuit.
6. How do I fix the P1460 code in my 2009 Ford Fusion?
Repairs may include replacing the WOT A/C cutoff relay, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming or replacing the PCM if necessary.
7. How much does it cost to repair the P1460 code on a 2009 Ford Fusion?
Repair costs vary, but replacing the WOT A/C cutoff relay typically costs $50–$150, while wiring repairs or PCM replacement can be more expensive.
8. Can a bad PCM cause the P1460 code in a 2009 Ford Fusion?
Yes, a faulty PCM can fail to properly control the WOT A/C cutoff circuit, triggering the P1460 code, though this is less common than wiring or relay issues.
9. Will clearing the P1460 code fix the issue permanently?
Clearing the code may turn off the Check Engine Light temporarily, but the underlying issue must be addressed to prevent the code from returning.
10. Can a blown fuse cause the P1460 code in a 2009 Ford Fusion?
Yes, a blown fuse in the A/C or WOT circuit can disrupt the system and trigger the P1460 code, so it’s important to check all related fuses.
Discuss the causes and fixes for P1460 2009 Ford Fusion OBDII Code
Code P1460 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
