AutoCodes – Ford – P1460 2008 Ford Fusion

P1460 2008 Ford Fusion Code - Wide Open Throttle Air Conditioning Cutoff Circuit Malfunction

Quick Answer

The Powertrain Control Module (PCM) monitors the Wide Open Throttle A/C Cut-Off (WAC) circuit. Common causes include Faulty Wide Open Throttle A/C Cutoff (WAC) Relay, Wide Open Throttle A/C Cutoff Relay harness is open or shorted, Wide Open Throttle A/C Cutoff Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1460 2008 Ford Fusion indicates Wide Open Throttle Air Conditioning Cutoff Circuit Malfunction.
Common causes: Common causes include Faulty Wide Open Throttle A/C Cutoff (WAC) Relay, Wide Open Throttle A/C Cutoff Relay harness is open or shorted, Wide Open Throttle A/C Cutoff Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,785

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1460 2008 Ford Fusion Description

The Powertrain Control Module (PCM) monitors the Wide Open Throttle A/C Cut-Off (WAC) circuit. The Diagnostic Trouble Code (DTC) P1460 is set when an excessive current draw is detected when the PCM grounds Wide Open Throttle A/C Cut-Off circuit, or voltage is not detected on WAC circuit when PCM interrupts ground on WAC circuit.

OBDII Code P1460 2008 Ford Fusion - Wide Open Throttle Air Conditioning Cutoff Circuit Malfunction - AutoCodes.com — P1460 2008 Ford Fusion Code - Wide Open Throttle Air Conditioning Cutoff Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC P1460 2008 Ford Fusion?

Faulty Wide Open Throttle A/C Cutoff (WAC) Relay
Wide Open Throttle A/C Cutoff Relay harness is open or shorted
Wide Open Throttle A/C Cutoff Relay circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P1460 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1460 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1460 2008 Ford Fusion code?

Need more information on how to fix the P1460 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1460 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1460 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P1460 in a 2008 Ford Fusion?

- The common symptoms include the air conditioning system not functioning properly, the engine stalling at idle, and the check engine light illuminating on the dashboard.

2. What does the OBDII code P1460 indicate in a 2008 Ford Fusion?

- The code P1460 indicates a Wide Open Throttle Air Conditioning Cutoff Circuit Malfunction in the vehicle.

3. What are the possible causes of OBDII code P1460 in a 2008 Ford Fusion?

- The possible causes include a faulty air conditioning cutout relay, a damaged wiring harness, or a malfunctioning PCM (Powertrain Control Module).

4. How can I diagnose the OBDII code P1460 in my 2008 Ford Fusion?

- You can diagnose the code by checking the air conditioning cutout relay, inspecting the wiring for any damage, and using an OBDII scanner to read the trouble codes stored in the PCM.

5. Can I still drive my 2008 Ford Fusion with the OBDII code P1460 present?

- It is not recommended to drive the vehicle with the code P1460 present, as it can affect the performance of the engine and the air conditioning system.

6. How can I repair OBDII code P1460 in my 2008 Ford Fusion?

- To repair the code P1460, you may need to replace the faulty air conditioning cutout relay, repair any damaged wiring, or reprogram the PCM if necessary.

7. Are there any DIY tips for fixing OBDII code P1460 in a 2008 Ford Fusion?

- While some simple checks like inspecting the relay and wiring can be done DIY, it is recommended to consult a professional mechanic for a proper diagnosis and repair.

8. Will resetting the OBDII code P1460 in my 2008 Ford Fusion make it go away permanently?

- Resetting the code may temporarily clear it, but if the underlying issue causing the code is not addressed, it is likely to reappear after some driving cycles.

9. How long does it typically take to repair OBDII code P1460 in a 2008 Ford Fusion?

- The repair time can vary depending on the exact cause of the code, but it may take anywhere from a few hours to a day at a repair shop.

10. Is it important to address OBDII code P1460 promptly in a 2008 Ford Fusion?

- Yes, it is important to address the code promptly to prevent any further damage to the engine or the air conditioning system in your 2008 Ford Fusion.