AutoCodes – Honda – P145D 2018 Honda CR-V

P145D 2018 Honda CR-V Code - Evaporative Emission System Purge Flow Malfunction at Turbocharging

Quick Answer

The fuel vapor in the fuel tank is temporarily stored in the Evaporative Emission (EVAP) Canister and drawn into the engine through the EVAP Canister Purge Valve. Common causes include Faulty EVAP Canister Purge Valve, Faulty Fuel Tank Pressure (FTP) Sensor, EVAP Canister Purge Valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P145D 2018 Honda CR-V indicates Evaporative Emission System Purge Flow Malfunction at Turbocharging.
Common causes: Common causes include Faulty EVAP Canister Purge Valve, Faulty Fuel Tank Pressure (FTP) Sensor, EVAP Canister Purge Valve harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 84

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 02, 2025

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P145D 2018 Honda CR-V Description

The fuel vapor in the fuel tank is temporarily stored in the Evaporative Emission (EVAP) Canister and drawn into the engine through the EVAP Canister Purge Valve. The Powertrain Control Module (PCM) controls the amount of vapor introduced into the engine by varying the duty cycle of the EVAP canister purge valve according to the condition of the engine.
The PCM checks the purge flow conditions on both negative and boost pressure sides. If either side of the purge flow is detected as abnormal, it is determined that there is a clog or disconnection on the abnormal side of the purge line. If both sides of the purge flow are detected as abnormal, it is determined that the purge lines are abnormal, or the EVAP canister purge valve is stuck opened.
Purge flow check of boost pressure side: The EVAP canister purge valve opens normally (EVAP canister purge valve OPEN OK) and detects that the purge flow is normal when the pulse of the EVAP canister purge valve duty cycle is transmitted to the Fuel Tank Pressure (FTP) Sensor during purge flow (pulse method).

OBDII Code P145D 2018 Honda CR-V - Evaporative Emission System Purge Flow Malfunction at Turbocharging - AutoCodes.com — P145D 2018 Honda CR-V Code - Evaporative Emission System Purge Flow Malfunction at Turbocharging

What does this mean?

What are the Possible Causes of the DTC P145D 2018 Honda CR-V?

Faulty EVAP Canister Purge Valve
Faulty Fuel Tank Pressure (FTP) Sensor
EVAP Canister Purge Valve harness is open or shorted
EVAP Canister Purge Valve circuit poor electrical connection

How to Fix the DTC P145D 2018 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P145D 2018 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P145D 2018 Honda CR-V code?

Need more information on how to fix the P145D 2018 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P145D 2018 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.