AutoCodes – Toyota – P1451 2009 Toyota Prius

P1451 2009 Toyota Prius Code - Fuel Tank Pressure Sensor Range/Performance

Quick Answer

While the engine is running, if a predetermined condition (closed loop, etc.) is met, the purge VSV is opened by the Engine Control Module (ECM) and stored fuel vapors in the canister are purged to the intake manifold. Common causes include Faulty Fuel Tank Pressure (FTP), Fuel Tank Pressure harness is open or shorted, Fuel Tank Pressure circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1451 2009 Toyota Prius indicates Fuel Tank Pressure Sensor Range/Performance.
Common causes
Common causes include Faulty Fuel Tank Pressure (FTP), Fuel Tank Pressure harness is open or shorted, Fuel Tank Pressure circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,906
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 23, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1451 2009 Toyota Prius Description

While the engine is running, if a predetermined condition (closed loop, etc.) is met, the purge VSV is opened by the Engine Control Module (ECM) and stored fuel vapors in the canister are purged to the intake manifold. The ECM changes the duty cycle ratio of the purge VSV to control purge flow volume. The purge flow volume is also determined by the intake manifold pressure. Atmospheric pressure is allowed into the canister through the vent valve to ensure that the purge flow is maintained when the negative pressure (vacuum) is applied to the canister.
Key-off monitor
This monitor checks for Evaporative Emission (EVAP) system leaks and canister pump module malfunctions. The monitor starts 5 hours after the power switch is turned OFF. More than 5 hours are required to allow the fuel to cool down to stabilize the Fuel Tank Pressure (FTP), thus making the EVAP system monitor more accurateThe leak detection pump creates negative pressure (vacuum) in the EVAP system and the pressure is measured. Finally, the ECM monitors for leaks from the EVAP system and malfunctions in both the canister pump module and purge VSV, based on the EVAP pressure.
OBDII Code P1451 2009 Toyota Prius - Fuel Tank Pressure Sensor Range/Performance - AutoCodes.com
P1451 2009 Toyota Prius Code - Fuel Tank Pressure Sensor Range/Performance

What are the Possible Causes of the DTC P1451 2009 Toyota Prius?

  • Faulty Fuel Tank Pressure (FTP)
  • Fuel Tank Pressure harness is open or shorted
  • Fuel Tank Pressure circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P1451 2009 Toyota Prius?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1451 2009 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1451 2009 Toyota Prius code?

Need more information on how to fix the P1451 2009 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1451 2009 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1451 2009 Toyota Prius Code

1. What does the OBDII code P1451 on a 2009 Toyota Prius mean?

The code P1451 indicates a potential issue with the Fuel Tank Pressure Sensor Range/Performance in the vehicle.

2. What are the common symptoms of a P1451 code in a 2009 Toyota Prius?

Common symptoms include the check engine light coming on, rough idling, poor fuel efficiency, and potential difficulty starting the vehicle.

3. What are the possible causes of a P1451 code in a 2009 Toyota Prius?

The code can be triggered by a faulty fuel tank pressure sensor, a vacuum leak in the evaporative emissions system, a malfunctioning fuel cap, or a problem with the fuel tank itself.

4. How can I diagnose a P1451 code in my 2009 Toyota Prius?

Diagnosis typically involves using an OBDII scanner to retrieve the specific fault code, checking the fuel tank pressure sensor for proper operation, inspecting the evaporative emissions system for leaks, and ensuring the fuel cap is sealing correctly.

5. Can I continue driving my 2009 Toyota Prius with a P1451 code?

It is generally not recommended to continue driving with a P1451 code, as it can lead to decreased fuel efficiency and potential engine performance issues. It's best to address the problem promptly.

6. How can I repair a P1451 code in my 2009 Toyota Prius?

Repair options may include replacing the fuel tank pressure sensor, repairing any leaks in the evaporative emissions system, ensuring the fuel cap is functioning correctly, or addressing any issues with the fuel tank itself.

7. Will a P1451 code in a 2009 Toyota Prius cause the vehicle to fail an emissions test?

Yes, a P1451 code can cause the vehicle to fail an emissions test, as it indicates a problem with the evaporative emissions control system.

8. How much does it typically cost to repair a P1451 code in a 2009 Toyota Prius?

The cost of repairs can vary depending on the specific cause of the P1451 code, but it may range from $100 to $500 or more, including parts and labor.

9. Can I reset the check engine light after addressing a P1451 code in my 2009 Toyota Prius?

Yes, after addressing the underlying issue causing the P1451 code, you can reset the check engine light using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.

10. How can I prevent a P1451 code from occurring in my 2009 Toyota Prius?

To prevent a P1451 code, it's important to maintain regular vehicle maintenance, such as checking the fuel cap for a proper seal, inspecting the evaporative emissions system for leaks, and addressing any check engine light promptly.

Discuss the causes and fixes for P1451 2009 Toyota Prius OBDII Code

Code P1451 2009 Toyota Prius comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play