AutoCodesDodge – P144E Dodge

P144E Dodge Code - EGR Cooler Bypass Status Line Circuit Low

Quick Answer

The Exhaust Gas Recirculation (EGR) Cooler Bypass Valve is used to redirect the EGR gases around the cooler when the engine is under certain operating conditions. Common causes include Faulty EGR Cooler Bypass Valve, EGR Cooler Bypass Valve harness is open or shorted, EGR Cooler Bypass Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P144E Dodge indicates EGR Cooler Bypass Status Line Circuit Low.
Common causes
Common causes include Faulty EGR Cooler Bypass Valve, EGR Cooler Bypass Valve harness is open or shorted, EGR Cooler Bypass Valve circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 12,562
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 27, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P144E Dodge Description

The Exhaust Gas Recirculation (EGR) Cooler Bypass Valve is used to redirect the EGR gases around the cooler when the engine is under certain operating conditions. The EGR Cooler Bypass Valve is a smart device which communicates it's status to the Powertrain Control Module (PCM). At key on the EGR Cooler Bypass Valve drives the signal line low and then high and the PCM monitors for the correct status response from the EGR Cooler Bypass Valve. Throughout engine operation the PCM sends commands via the signal circuit to the EGR Cooler Bypass Valve and monitors the status line to confirm that the EGR Cooler Bypass Valve has reached the commanded position. When a fault occurs, the EGR Cooler Bypass valve will send a signal of less than one Volt on the status line to the PCM. This monitor is a one trip fault.
OBDII Code P144E Dodge - EGR Cooler Bypass Status Line Circuit Low - AutoCodes.com
P144E Dodge Code - EGR Cooler Bypass Status Line Circuit Low

What are the Possible Causes of the DTC P144E Dodge?

  • Faulty EGR Cooler Bypass Valve
  • EGR Cooler Bypass Valve harness is open or shorted
  • EGR Cooler Bypass Valve circuit poor electrical connection

How to Fix the DTC P144E Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P144E Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P144E Dodge code?

Need more information on how to fix the P144E Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P144E Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P144E Dodge Code

1. What does the OBDII code P144E mean on a Dodge vehicle?

The P144E code indicates a problem with the EGR (Exhaust Gas Recirculation) cooler bypass status line circuit, specifically a low voltage or signal issue.

2. What are the common symptoms of code P144E?

Symptoms may include the check engine light turning on, decreased engine performance, rough idling, or increased emissions.

3. What causes the P144E code to appear?

The code is commonly caused by a faulty EGR cooler bypass valve, damaged wiring or connectors, or a malfunctioning EGR cooler bypass sensor.

4. Can I drive my Dodge with the P144E code?

While it may be possible to drive, it’s not recommended as it can lead to increased emissions, engine inefficiency, or potential damage to the EGR system if left unresolved.

5. How is the P144E code diagnosed?

A mechanic will typically use a scan tool to check for codes, inspect the EGR cooler bypass circuit wiring, and test the bypass valve and sensor for proper operation.

6. What repairs are needed to fix code P144E?

Repairs may include replacing the EGR cooler bypass valve, fixing damaged wiring or connectors, or replacing the EGR cooler bypass sensor.

7. How much does it cost to fix the P144E code?

Repair costs vary but may range from $150 to $500 depending on the parts and labor involved in resolving the issue.

8. Can a faulty EGR cooler bypass valve damage the engine?

Yes, if the valve is stuck or malfunctioning, it can cause poor exhaust flow management, leading to engine inefficiency and potential long-term damage.

9. How can I prevent the P144E code from recurring?

Regular maintenance of the EGR system, including cleaning and inspecting components, can help prevent issues with the EGR cooler bypass circuit.

10. Will clearing the P144E code with a scan tool fix the issue?

Clearing the code will turn off the check engine light temporarily, but the underlying problem must be addressed to prevent the code from returning.

Discuss the causes and fixes for P144E Dodge OBDII Code

Code P144E Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play