P144E Cadillac Code - Closed Loop Diesel Particulate Filter Regeneration Control At Limit Stage 2 Low Temperature
Quick Answer
The main function of the Close-Coupled Diesel Oxidation Catalyst (CCDOC) is to control emissions of non-methane hydrocarbons and Carbon Monoxide (CO). Common causes include Faulty Exhaust Gas Temperature Sensor, Exhaust Gas Temperature Sensor harness is open or shorted, Exhaust Gas Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P144E Cadillac indicates Closed Loop Diesel Particulate Filter Regeneration Control At Limit Stage 2 Low Temperature.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor, Exhaust Gas Temperature Sensor harness is open or shorted, Exhaust Gas Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P144E Cadillac Description
The Diagnostic Trouble Code (DTC) will be set when the ECM detects insufficient exhaust temperature downstream of the first diesel oxidation catalyst during a DPF regeneration.
What are the Possible Causes of the DTC P144E Cadillac?
- Faulty Exhaust Gas Temperature Sensor
- Exhaust Gas Temperature Sensor harness is open or shorted
- Exhaust Gas Temperature Sensor circuit poor electrical connection
- Faulty Diesel Oxidation Catalyst (DOC)
How to Fix the DTC P144E Cadillac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P144E Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P144E Cadillac code?
Need more information on how to fix the P144E Cadillac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P144E Cadillac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P144E Cadillac Code
1. What are the common symptoms of OBDII code P144E in a Cadillac related to Closed Loop Diesel Particulate Filter Regeneration Control At Limit Stage 2 Low Temperature?
- Common symptoms may include poor engine performance, decreased fuel efficiency, and the illumination of the check engine light.
2. What are the possible causes of OBDII code P144E in a Cadillac?
- Possible causes can include a malfunctioning diesel particulate filter, issues with the regeneration control system, sensor faults, or wiring problems.
3. How can I diagnose OBDII code P144E in my Cadillac?
- Diagnosis typically involves using an OBDII scanner to retrieve the trouble codes, conducting a visual inspection of related components, and performing specific tests recommended by Cadillac.
4. What are some repair tips for addressing OBDII code P144E in a Cadillac?
- Repair tips may include checking and replacing faulty sensors, inspecting and cleaning the diesel particulate filter, verifying proper operation of the regeneration control system, and clearing the trouble codes.
5. Is it safe to continue driving my Cadillac with OBDII code P144E present?
- It is not recommended to continue driving with this code present, as it can lead to further damage to the vehicle and may result in more costly repairs down the line.
6. Can I reset the check engine light after addressing OBDII code P144E in my Cadillac?
- Yes, once the underlying issue causing the code has been repaired, the check engine light can be reset using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.
7. How important is it to address OBDII code P144E promptly in my Cadillac?
- It is important to address this code promptly to ensure optimal engine performance, fuel efficiency, and to prevent potential damage to the emissions control system.
8. Are there any preventive maintenance measures I can take to avoid OBDII code P144E in my Cadillac?
- Regularly servicing the diesel particulate filter, following recommended maintenance schedules, and using high-quality diesel fuel can help prevent issues related to this code.
9. Can a DIY enthusiast with automotive knowledge repair OBDII code P144E in a Cadillac?
- Depending on the DIY enthusiast's skill level and access to tools, some repairs related to this code may be possible. However, complex diagnostics and repairs may require professional assistance.
10. How long does it typically take to repair OBDII code P144E in a Cadillac?
- The repair time can vary depending on the exact cause of the code, availability of parts, and the expertise of the technician. In general, it may take a few hours to a full day to address this issue.
Discuss the causes and fixes for P144E Cadillac OBDII Code
Code P144E Cadillac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
