P1446 2004 Nissan Maxima Code - EVAP Canister Vent Control Valve Close
Quick Answer
The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent. Common causes include Faulty EVAP Pressure Sensor, EVAP Pressure Sensor harness is open or shorted, EVAP Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1446 2004 Nissan Maxima indicates EVAP Canister Vent Control Valve Close.
- Common causes
- Common causes include Faulty EVAP Pressure Sensor, EVAP Pressure Sensor harness is open or shorted, EVAP Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1446 2004 Nissan Maxima Description
This solenoid valve responds to signals from the Engine Control Module (ECM). When the ECM sends an ON signal, the coil in the solenoid valve is energized. A plunger will then move to seal the canister vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative emission control system components.
This solenoid valve is used only for diagnosis, and usually, remains opened. When the vent is closed, under normal purge conditions, the evaporative emission control system is depressurized and allows EVAP Control System (Small Leak) diagnosis.
What are the Possible Causes of the DTC P1446 2004 Nissan Maxima?
- Faulty EVAP Pressure Sensor
- EVAP Pressure Sensor harness is open or shorted
- EVAP Pressure Sensor circuit poor electrical connection
- Blocked rubber tube to EVAP canister vent control valve
- EVAP Water separator
- EVAP canister is saturated with water
- Faulty EVAP canister vent control valve
How to Fix the DTC P1446 2004 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1446 2004 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1446 2004 Nissan Maxima code?
Need more information on how to fix the P1446 2004 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1446 2004 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1446 2004 Nissan Maxima Code
1. What does OBDII code P1446 on a 2004 Nissan Maxima mean?
The code P1446 indicates a problem with the EVAP canister vent control valve close function in the vehicle's evaporative emission control system.
2. What are the common symptoms of a P1446 OBDII code in a 2004 Nissan Maxima?
Common symptoms include the check engine light illuminating on the dashboard, decreased fuel efficiency, and potential difficulty starting the vehicle.
3. What are the possible causes of a P1446 OBDII code in a 2004 Nissan Maxima?
Potential causes include a faulty EVAP canister vent control valve, a leak in the EVAP system, a damaged vacuum hose, or issues with the EVAP canister.
4. How serious is a P1446 OBDII code in a 2004 Nissan Maxima?
While the vehicle may still be operable with this code, it is important to address the issue promptly to prevent potential damage to the engine and ensure proper emissions control.
5. How can I diagnose a P1446 OBDII code in my 2004 Nissan Maxima?
Diagnosis typically involves using an OBDII scanner to retrieve the specific code, inspecting the EVAP system components for damage or leaks, and testing the functionality of the vent control valve.
6. Can I drive my 2004 Nissan Maxima with a P1446 OBDII code?
It is generally safe to drive the vehicle with this code, but it is recommended to have the issue diagnosed and repaired as soon as possible to avoid further complications.
7. How can I repair a P1446 OBDII code in a 2004 Nissan Maxima?
Repair options may include replacing the EVAP canister vent control valve, repairing any leaks in the EVAP system, replacing damaged vacuum hoses, or resetting the check engine light after addressing the issue.
8. How much does it cost to fix a P1446 OBDII code in a 2004 Nissan Maxima?
The cost of repairs can vary depending on the specific issue causing the code and whether you choose to address it yourself or take the vehicle to a mechanic. Costs typically range from $100 to $300.
9. How long does it take to repair a P1446 OBDII code in a 2004 Nissan Maxima?
The repair time can vary based on the complexity of the issue and the extent of the repairs needed. In general, it may take anywhere from 1 to 3 hours to diagnose and fix the problem.
10. Can I prevent a P1446 OBDII code from recurring in my 2004 Nissan Maxima?
Regular maintenance of the EVAP system, including checking for leaks and ensuring proper functioning of components, can help prevent the code from reoccurring.
Discuss the causes and fixes for P1446 2004 Nissan Maxima OBDII Code
Code P1446 2004 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
