AutoCodesMINI – P143F MINI

P143F MINI Code - Evaporative Emission System Afterrunning Diagnosis

Quick Answer

The Engine Control Module (ECM) monitors the Evaporative Emission System. Common causes include Faulty Evaporative Emission System, Evaporative Emission System harness is open or shorted, Evaporative Emission System circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P143F MINI indicates Evaporative Emission System Afterrunning Diagnosis.
Common causes
Common causes include Faulty Evaporative Emission System, Evaporative Emission System harness is open or shorted, Evaporative Emission System circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,049
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 27, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P143F MINI Description

The Engine Control Module (ECM) monitors the Evaporative Emission System. The ECM sets the OBDII code when the Evaporative Emission System is not to factory specifications.
OBDII Code P143F MINI - Evaporative Emission System Afterrunning Diagnosis - AutoCodes.com
P143F MINI Code - Evaporative Emission System Afterrunning Diagnosis

What are the Possible Causes of the DTC P143F MINI?

  • Faulty Evaporative Emission System
  • Evaporative Emission System harness is open or shorted
  • Evaporative Emission System circuit poor electrical connection

How to Fix the DTC P143F MINI?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P143F MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P143F MINI code?

Need more information on how to fix the P143F MINI code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P143F MINI code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P143F MINI Code

1. What does the OBDII code P143F mean in a MINI?

P143F indicates an issue with the Evaporative Emission System Afterrunning Diagnosis, which monitors fuel vapor leaks in the EVAP system after the engine is turned off.

2. What are the common symptoms of code P143F in a MINI?

Symptoms may include the Check Engine Light turning on, a slight fuel odor, or reduced fuel efficiency. In most cases, the car may drive normally.

3. What causes the P143F code to appear in a MINI?

Common causes include a faulty EVAP purge valve, a loose or damaged gas cap, a faulty EVAP leak detection pump, or damaged EVAP system hoses.

4. Can a loose gas cap trigger the P143F code on a MINI?

Yes, a loose, damaged, or improperly sealed gas cap is one of the most common causes of this code.

5. How is the P143F code diagnosed in a MINI?

A technician will use a scan tool to verify the code, visually inspect the EVAP system components, and may perform a smoke test to detect leaks.

6. Is it safe to drive a MINI with the P143F code?

While the car may still be drivable, ignoring the code can lead to increased emissions and potentially more damage to the EVAP system over time.

7. How do you fix the P143F code on a MINI?

Repairs may include tightening or replacing the gas cap, replacing a faulty EVAP purge valve, repairing leaks in the EVAP system, or replacing the EVAP leak detection pump.

8. How much does it cost to fix the P143F code on a MINI?

Repair costs vary depending on the root cause. Gas cap replacement might cost $20-$50, while replacing EVAP components like the leak detection pump could cost $200-$500 or more.

9. Can I reset the P143F code without fixing the problem?

You can clear the code using an OBDII scanner, but it will likely return if the underlying issue isn’t resolved.

10. How can I prevent the P143F code from occurring again in my MINI?

Regularly check the gas cap for proper sealing, inspect EVAP system components for damage, and ensure routine maintenance is performed to catch issues early.

Discuss the causes and fixes for P143F MINI OBDII Code

Code P143F MINI comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play