P1436 2017 GMC Sierra Code - Particulate Matter Sensor Control Module Temperature Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Particulate Matter Sensor Control Module, Particulate Matter Sensor Control Module harness is open or shorted, Particulate Matter Sensor Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1436 2017 GMC Sierra indicates Particulate Matter Sensor Control Module Temperature Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Particulate Matter Sensor Control Module, Particulate Matter Sensor Control Module harness is open or shorted, Particulate Matter Sensor Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1436 2017 GMC Sierra Description
What are the Possible Causes of the DTC P1436 2017 GMC Sierra?
- Faulty Particulate Matter Sensor Control Module
- Particulate Matter Sensor Control Module harness is open or shorted
- Particulate Matter Sensor Control Module circuit poor electrical connection
How to Fix the DTC P1436 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1436 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1436 2017 GMC Sierra code?
Need more information on how to fix the P1436 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1436 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1436 2017 GMC Sierra Code
What are the common symptoms of OBDII code P1436 in a 2017 GMC Sierra?
Common symptoms include the illumination of the Check Engine Light, reduced engine performance, increased fuel consumption, and potential issues with the vehicle's emissions control system.
What can cause the OBDII code P1436 to appear in a 2017 GMC Sierra?
The code P1436 typically indicates a problem with the Particulate Matter Sensor Control Module Temperature Signal Message Counter being incorrect. This can be caused by a faulty sensor, wiring issues, or problems with the control module itself.
How serious is the OBDII code P1436 in a 2017 GMC Sierra?
While the code may not cause immediate drivability issues, it is important to address it promptly to prevent potential damage to the vehicle's emissions system and ensure optimal engine performance.
How can I diagnose the OBDII code P1436 in my 2017 GMC Sierra?
Diagnosing the code may require using a diagnostic scanner to retrieve the specific details of the fault. It is recommended to consult a professional mechanic or dealership for a thorough diagnosis and repair.
What is the typical repair for OBDII code P1436 in a 2017 GMC Sierra?
The repair for the P1436 code may involve replacing the faulty Particulate Matter Sensor Control Module, repairing damaged wiring, or addressing issues with the sensor itself. A qualified technician can accurately diagnose and repair the problem.
Can I continue driving my 2017 GMC Sierra with the OBDII code P1436 present?
It is not recommended to ignore the P1436 code and continue driving the vehicle without addressing the underlying issue. Doing so may lead to further damage and potential safety concerns.
How much does it cost to repair the OBDII code P1436 in a 2017 GMC Sierra?
The cost of repairing the P1436 code can vary depending on the specific cause of the issue, labor rates, and parts needed for the repair. It is advisable to obtain quotes from different repair shops or dealerships for an accurate estimate.
Can I reset the Check Engine Light after repairing the OBDII code P1436 in my 2017 GMC Sierra?
After the repair is completed, the Check Engine Light can be reset using a diagnostic scanner to clear the stored fault codes. This will turn off the warning light if the issue has been successfully resolved.
Discuss the causes and fixes for P1436 2017 GMC Sierra OBDII Code
Code P1436 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
