P1434 2018 GMC Sierra Code - Fuel Level Sensor 1 Reference Performance
Quick Answer
The signal circuit is connected to the Fuel Pump Driver Control Module, the control module communicates with the Engine Control Module (ECM) via serial data. Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1434 2018 GMC Sierra indicates Fuel Level Sensor 1 Reference Performance.
- Common causes
- Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1434 2018 GMC Sierra Description
What are the Possible Causes of the DTC P1434 2018 GMC Sierra?
- Faulty Fuel Pump Driver Control Module
- Fuel Pump Driver Control Module harness is open or shorted
- Fuel Pump Driver Control Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1434 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1434 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1434 2018 GMC Sierra code?
Need more information on how to fix the P1434 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1434 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1434 2018 GMC Sierra Code
What does the OBDII code P1434 mean on a 2018 GMC Sierra?
Code P1434 indicates a "Fuel Level Sensor 1 Reference Performance" issue, meaning the fuel level sensor is not providing the expected signal to the vehicle’s computer.
What are the symptoms of code P1434 in a 2018 GMC Sierra?
Common symptoms include erratic or inaccurate fuel gauge readings, an illuminated check engine light, and possible reduced fuel efficiency.
What causes code P1434 to appear in a 2018 GMC Sierra?
Potential causes include a faulty fuel level sensor, damaged wiring or connectors in the fuel sensor circuit, or a malfunctioning powertrain control module (PCM).
Can I drive my 2018 GMC Sierra with a P1434 code?
While the vehicle may still be drivable, inaccurate fuel readings can lead to running out of fuel unexpectedly, so it’s best to address the issue promptly.
How do I diagnose a P1434 code on my 2018 GMC Sierra?
Start by inspecting the fuel level sensor wiring and connectors for damage or corrosion, then use a scan tool to check the sensor signal and compare it to the expected parameters.
Is the fuel level sensor difficult to replace in a 2018 GMC Sierra?
Replacing the fuel level sensor can be labor-intensive, as it often requires removing the fuel tank to access the sensor.
How much does it cost to repair a P1434 code on a 2018 GMC Sierra?
Repair costs can vary but typically range from $200 to $500, depending on whether you’re replacing the fuel level sensor or addressing wiring issues.
Can a P1434 code be caused by a software issue in the PCM?
While less common, a software glitch or outdated PCM programming can sometimes trigger the P1434 code. A reprogramming or update may resolve the issue.
Will clearing the code fix P1434 on a 2018 GMC Sierra?
Clearing the code may temporarily turn off the check engine light, but the code will likely return if the underlying issue is not resolved.
What tools are needed to troubleshoot a P1434 code?
You’ll need an OBDII scan tool capable of reading live data, a multimeter for checking electrical circuits, and possibly a fuel tank removal tool if replacing the sensor.
Discuss the causes and fixes for P1434 2018 GMC Sierra OBDII Code
Code P1434 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
