Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost of diagnosing the P142E GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The Particulate Matter (PM) sensor monitors the amount of the particulates (soot) in the diesel exhaust gas exiting the tailpipe. The PM sensor is similar to the heated oxygen sensor with a ceramic element, but also includes an individually calibrated Sensor Control Unit (SCU). The sensing element includes comb-shaped Interdigital Electrodes (IDE), a heater, and a positive temperature coefficient resistor for temperature measurement.
The operation of the PM Sensor is based on the electrical conductivity characteristic of the diesel particulate. As the exhaust gas flows over the sensing element, soot is absorbed in the combs between the electrodes, eventually creating a conductive path. When the path is formed, it generates a current based on the voltage being applied to the element. The measurement process continues until a preset current value is reached. To avoid misleading readings, the sensor performs a regeneration where the soot is cleaned off by heating up the element before the measurement phase begins. The amount of regenerations is based on vehicle strategy; when the calibrated number of regenerations is reached, the cumulative current readings are used to determine the amount of soot concentration in the exhaust gas which in turn determines the collection efficiency of the Diesel Particulate Filter (DPF). The Diagnostic Trouble Code (DTC) when the Particular Matter Sensor Control Unit detects an internal electrical fault or an over-temperature condition on one of the internal temperature sensors.
Need more information on how to fix the P142E GMC code? Get Access to Factory Service Manuals
Get the P142E GMC code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P142E GMC code? Have you replaced any parts?
Any information is appreciated. Thanks