AutoCodes – Nissan – P1421 2009 Nissan Rogue

P1421 2009 Nissan Rogue Code - Cold Start Control

Quick Answer

The Engine Control Module (ECM) controls ignition timing and engine idle speed when the engine is started with pre-warming up condition. Common causes include Lack of intake air volume (block air filter), Fuel injection system (Clogged fuel injector or bad fuel pump), Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1421 2009 Nissan Rogue indicates Cold Start Control.
Common causes
Common causes include Lack of intake air volume (block air filter), Fuel injection system (Clogged fuel injector or bad fuel pump), Faulty Engine Control Module (ECM).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,566
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 07, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1421 2009 Nissan Rogue Description

The Engine Control Module (ECM) controls ignition timing and engine idle speed when the engine is started with pre-warming up condition. This control promotes the activation of three-way catalyst by heating the catalyst and reduces emissions. The Diagnostic Trouble Code (DTC) will be set when the ECM does not control ignition timing and engine speed properly when the engine is started with prewarming up condition.
OBDII Code P1421 2009 Nissan Rogue - Cold Start Control - AutoCodes.com
P1421 2009 Nissan Rogue Code - Cold Start Control

What are the Possible Causes of the DTC P1421 2009 Nissan Rogue?

  • Lack of intake air volume (block air filter)
  • Fuel injection system (Clogged fuel injector or bad fuel pump)
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P1421 2009 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1421 2009 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1421 2009 Nissan Rogue code?

Need more information on how to fix the P1421 2009 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1421 2009 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1421 2009 Nissan Rogue Code

1. What does the OBDII code P1421 mean on a 2009 Nissan Rogue?

P1421 indicates a problem with the Cold Start Control system, which helps the engine operate efficiently during cold starts.

2. What are the common symptoms of code P1421 in a Nissan Rogue?

Typical symptoms include rough idling during cold starts, increased emissions, and sometimes reduced fuel efficiency.

3. What causes the P1421 code to appear?

Common causes include a faulty intake air temperature (IAT) sensor, a malfunctioning engine coolant temperature (ECT) sensor, or issues with the cold start system wiring.

4. Can I drive my 2009 Nissan Rogue with the P1421 code?

While the car may still be drivable, ignoring the code can lead to poor performance and increased emissions, particularly in cold weather.

5. How do I diagnose the P1421 code in my Nissan Rogue?

Start by checking the IAT sensor, ECT sensor, and related wiring for damage or loose connections. A scan tool can help confirm sensor readings.

6. How do I fix the P1421 code on a 2009 Nissan Rogue?

Repairs may involve replacing a faulty IAT or ECT sensor, repairing damaged wiring, or addressing issues in the ECM if other components test fine.

7. How much does it cost to fix the P1421 code?

Repair costs vary, but replacing a sensor typically costs between $100-$300, including parts and labor.

8. Can a dirty air filter cause the P1421 code?

A clogged air filter is unlikely to directly trigger P1421 but can affect overall engine performance, which might contribute to related issues.

9. Does cold weather make the P1421 code more likely to appear?

Yes, as the code relates to the cold start system, colder temperatures can exacerbate issues and make the code more likely to trigger.

10. Will clearing the P1421 code without repairs fix the problem?

Clearing the code will turn off the check engine light temporarily, but the underlying issue will likely cause the code to return.

Discuss the causes and fixes for P1421 2009 Nissan Rogue OBDII Code

Code P1421 2009 Nissan Rogue comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play