P1416 JEEP - Cylinder 6 Reactivation Control Performance
P1416 JEEP Possible Causes
- Low oil pressure or blocked oil passage
- Faulty MDS Solenoid
- MDS Solenoid harness is open or shorted
- MDS Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
First diagnose P1416 JEEP code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the P1416 JEEP code
Labor: 1.0The cost of diagnosing the P1416 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the P1416 JEEP code detected?The Engine Control Module (ECM) transistioned between 8 and 4 cylinder function - Cylinder 1 failed to reactivate
P1416 JEEP Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1416 Jeep DescriptionWhen all criteria has been met, power is supplied to each MDS Solenoid when the engine is making a transition from 8 cylinder mode to 4 cylinder mode. By actuating the solenoid, oil pressure is raised to the pair of lifters that coincide with each particular solenoid. The oil pressure pushes in the locking pins that allows the lifter to collapse, decoupling the valves and camshaft.
P1416 JEEP More InformationNeed more information on how to fix the P1416 JEEP code?
Get Access to Factory Service Manuals
Need more help?Get the P1416 Jeep code diagnosed by a professional: Find a repair shop in your area
P1416 JEEP CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1416 Jeep code? Have you replaced any parts?
Any information is appreciated. Thanks