P1416 Dodge Code - Cylinder 6 Reactivation Control Performance
Quick Answer
When all criteria has been met, power is supplied to each MDS Solenoid when the engine is making a transition from 8 cylinder mode to 4 cylinder mode. Common causes include Low oil pressure or blocked oil passage, Faulty MDS Solenoid, MDS Solenoid harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1416 Dodge indicates Cylinder 6 Reactivation Control Performance.
- Common causes
- Common causes include Low oil pressure or blocked oil passage, Faulty MDS Solenoid, MDS Solenoid harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1416 Dodge Description
What are the Possible Causes of the DTC P1416 Dodge?
- Low oil pressure or blocked oil passage
- Faulty MDS Solenoid
- MDS Solenoid harness is open or shorted
- MDS Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1416 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1416 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1416 Dodge code?
Need more information on how to fix the P1416 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1416 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1416 Dodge Code
What does the OBDII code P1416 mean for a Dodge vehicle?
P1416 indicates a problem with the Cylinder 6 Reactivation Control Performance, typically related to issues in the cylinder deactivation system or valve control.
What are common symptoms of the P1416 code in a Dodge?
Symptoms may include reduced engine performance, misfires, decreased fuel efficiency, or the Check Engine Light turning on.
What causes the P1416 code in a Dodge?
Common causes include faulty cylinder deactivation solenoids, wiring issues, low oil pressure, or problems within the valve train components.
Can low oil pressure trigger the P1416 code?
Yes, low oil pressure can affect the cylinder deactivation system, leading to the P1416 code.
How do I diagnose the P1416 code in a Dodge?
Start by scanning for additional codes, inspecting the cylinder 6 solenoid, checking wiring and connectors, and verifying oil pressure levels.
Is it safe to drive with the P1416 code?
Driving with the P1416 code may lead to engine performance issues or further damage. It’s best to address the problem promptly.
How is the P1416 code typically repaired?
Repairs may involve replacing the cylinder deactivation solenoid, fixing wiring issues, or addressing oil pressure problems.
Can a damaged valve lifter cause the P1416 code?
Yes, a damaged valve lifter can interfere with cylinder reactivation and trigger the P1416 code.
Does the P1416 code affect fuel economy?
Yes, the P1416 code can reduce fuel efficiency due to improper cylinder reactivation.
What tools are needed to diagnose the P1416 code?
You’ll need an OBDII scanner, a multimeter for testing electrical components, and potentially a mechanical toolset to inspect solenoids and valve train components.
Discuss the causes and fixes for P1416 Dodge OBDII Code
-
replaced the MDS solenoid on the number six cylinder, (broke the old one during removal) with the new and improved version. Now getting a P1416 reactivation code as soon as I turn the key to the on position. The coil has 14 ohms resistance before I installed it so I don't think its bad, the ECU is new as well for a Non MDS engine so I'm slightly confused as to what the overall cause to this problem is.
-
Hello Dennis. Let me check if I can find more information. What model and year is your Dodge.
-
We've changed the mds. Wiring looks good. Was throwing codes of 1 and 6. We changed them all. Even got new spark plugs n changed the ignition coil for 1 and 6. What else could this code be for if all mds was changed. Its an 08 dodge charger r/t.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
