P1414 Chrysler Code - Cylinder 4 Reactivation Control Performance
Quick Answer
When all criteria has been met, power is supplied to each MDS Solenoid when the engine is making a transition from 8 cylinder mode to 4 cylinder mode. Common causes include Low oil pressure or blocked oil passage, Faulty MDS Solenoid, MDS Solenoid harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1414 Chrysler indicates Cylinder 4 Reactivation Control Performance.
- Common causes
- Common causes include Low oil pressure or blocked oil passage, Faulty MDS Solenoid, MDS Solenoid harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1414 Chrysler Description
What are the Possible Causes of the DTC P1414 Chrysler?
- Low oil pressure or blocked oil passage
- Faulty MDS Solenoid
- MDS Solenoid harness is open or shorted
- MDS Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1414 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1414 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1414 Chrysler code?
Need more information on how to fix the P1414 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1414 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1414 Chrysler Code
1. What are the common symptoms of OBDII code P1414 in a Chrysler related to Cylinder 4 Reactivation Control Performance?
Symptoms may include engine misfires, rough idling, reduced power, and the illumination of the check engine light.
2. What are the possible causes of OBDII code P1414 in a Chrysler indicating Cylinder 4 Reactivation Control Performance issues?
Potential causes include a faulty reactivation solenoid, damaged wiring or connectors, vacuum leaks, or issues with the cylinder deactivation system.
3. How can I diagnose the OBDII code P1414 in a Chrysler related to Cylinder 4 Reactivation Control Performance?
Diagnosis typically involves using a scan tool to read the code, conducting a visual inspection of related components, checking for vacuum leaks, and testing the reactivation solenoid.
4. What are some repair tips to address OBDII code P1414 in a Chrysler for Cylinder 4 Reactivation Control Performance problems?
Repair tips may include replacing the faulty reactivation solenoid, repairing damaged wiring or connectors, fixing any vacuum leaks, and ensuring proper functioning of the cylinder deactivation system.
5. Can driving with OBDII code P1414 related to Cylinder 4 Reactivation Control Performance cause further damage to my Chrysler?
Continued driving with this code present can potentially lead to increased fuel consumption, engine performance issues, and further damage to engine components if not addressed promptly.
6. How urgent is it to address OBDII code P1414 in a Chrysler indicating Cylinder 4 Reactivation Control Performance problems?
While the vehicle may still be driveable with this code, it is recommended to address the issue promptly to prevent potential long-term damage and ensure optimal engine performance.
7. Are there any preventative measures to avoid OBDII code P1414 related to Cylinder 4 Reactivation Control Performance in my Chrysler?
Regular maintenance, such as checking and replacing worn components, ensuring proper engine operation, and addressing any related issues promptly, can help prevent this code from appearing.
8. Can I reset the OBDII code P1414 in a Chrysler for Cylinder 4 Reactivation Control Performance without addressing the underlying issue?
Resetting the code without addressing the root cause will only temporarily turn off the check engine light and will not resolve the underlying issue affecting cylinder 4 reactivation control performance.
9. Is it possible to drive my Chrysler safely with OBDII code P1414 related to Cylinder 4 Reactivation Control Performance if I cannot repair it immediately?
If the vehicle is still running relatively smoothly and there are no severe symptoms present, it may be possible to drive the car for a short distance. However, it is advisable to address the issue as soon as possible.
10. How much can I expect to pay for repairs related to OBDII code P1414 in a Chrysler concerning Cylinder 4 Reactivation Control Performance?
The cost of repairs can vary depending on the specific underlying issue, parts needed, labor costs, and location. It is recommended to consult a professional mechanic for an accurate estimate.
Discuss the causes and fixes for P1414 Chrysler OBDII Code
-
hello
I have a 2006 5.7L hemi and it register the code P1414 i have changed coils ,sparks ,mds solenoid, and still have the code P1414 drove the car to the dealer they cant explaine the rattling (misfire) i did a core (hard) reset car will work perfectly but with in 1hour or a day it will start the ratteling again misfire ( Cylinder 4 Reactivation Control Performance) any one out there any ideas .-
-
The P1414 code for a 2006 5.7L HEMI engine refers to "Cylinder 4 Reactivation Control Performance", which is typically associated with the Multi-Displacement System (MDS). This system deactivates certain cylinders under light loads to improve fuel economy, and in your case, it’s having an issue specifically with cylinder 4.
Given that you’ve already replaced the coils, spark plugs, and MDS solenoid but still experience the issue along with rattling (misfire), it suggests there may be deeper issues to investigate. Let’s break down the possibilities and troubleshooting steps:
Possible Causes for P1414:
-
Wiring or Connector Issues:
- Inspect the wiring harness to the MDS solenoid for cylinder 4. There could be damage, corrosion, or loose connections, causing intermittent faults.
-
Oil Pressure or VVT System Issues:
- The MDS system relies on proper oil pressure to function. If there’s an oil pressure issue, or if the variable valve timing (VVT) system is not working correctly, it can affect cylinder deactivation/reactivation. Have the oil pressure tested and check the oil control valve.
-
Faulty MDS Lifters:
- MDS lifters (which control cylinder deactivation) can become stuck or worn over time, causing mechanical issues like misfiring or rattling. This is a common issue with HEMI engines, especially if high mileage or improper maintenance (oil starvation) occurred.
-
Camshaft or Valve Issues:
- A worn camshaft or damaged valve train components can cause misfires or poor performance when the cylinder is supposed to reactivate. If there’s rattling, it’s worth having a mechanic inspect the camshaft lobes and lifters for damage.
-
PCM (Powertrain Control Module) Fault:
- Although less likely, a fault in the PCM could cause incorrect MDS control. If everything else checks out, a re-flash or replacement of the PCM may be needed.
Recommended Next Steps:
-
Check for Wiring/Connector Issues:
- Look specifically at the MDS solenoid wiring for cylinder 4. Ensure there’s no corrosion, loose connections, or damaged wires.
-
Test Oil Pressure:
- Ensure the engine is maintaining adequate oil pressure, as MDS solenoids rely on proper pressure for activation.
-
Inspect the MDS Lifters:
- Have a mechanic pull the valve cover and check the MDS lifters. If they’re faulty, replacement is necessary.
-
Inspect the Camshaft and Valve Train:
- Look for any signs of wear or damage to the camshaft, pushrods, and valve springs for cylinder 4.
-
PCM Update or Re-Flash:
- If all mechanical checks are fine, consider having the PCM updated or re-flashed to correct any software-related issues.
Given that the issue resolves temporarily after a hard reset but comes back later, it could point to a mechanical issue (like MDS lifters or camshaft wear) that worsens as the vehicle heats up or is used over time.
-
-
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
