AutoCodes.com | All About OBDII Engine Codes
AutoCodes - GMC - P1413 GMC

P1413 GMC Code - Exhaust Gas Recirculation Cooler Bypass Valve Control Circuit Shorted

- Code Popularity: 279 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
Share on Facebook   Share on Twitter   Share on Linkedin

Code P1413 GMC Possible Causes

  • Faulty Exhaust Gas Recirculation (EGR) Cooler Bypass Valve
  • Exhaust Gas Recirculation Cooler Bypass Valve harness is open or shorted
  • Exhaust Gas Recirculation Cooler Bypass Valve circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How do I Fix the Code P1413 GMC?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your GMC have Safety Recalls? → Check here

What is the Cost to Diagnose the Code P1413 GMC?

Labor: 1.0

The cost of diagnosing the P1413 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

What are Code P1413 GMC Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

Code P1413 GMC Description

The Engine Control Module (ECM) uses the Exhaust Gas Recirculation (EGR) bypass valve position sensor to determine the position of the bypass valve. The ECM sends a reference voltage through the 5-volt reference circuit to the position sensor. The ECM provides a voltage return path for the sensor through the low reference circuit. A variable voltage signal, based on the valve position, is sent from the sensor to the ECM through the position sensor signal circuit. The ECM compares the actual bypass valve position with the desired bypass valve position when the valve is commanded open or closed. The EGR cooler bypass valve is controlled by the ECM through the bypass valve motor high control and the low control circuits. The ECM will pulse width modulate the low control circuit to ground when EGR cooler bypass is desired.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects a short circuit condition of the EGR cooler bypass valve motor control circuits for greater than 3 s.
OBDII Code P1413 GMC - Exhaust Gas Recirculation Cooler Bypass Valve Control Circuit Shorted - AutoCodes.com
P1413 GMC Code - Exhaust Gas Recirculation Cooler Bypass Valve Control Circuit Shorted

Need More Information on the P1413 GMC Code?

Need more information on how to fix the P1413 GMC code? Get Access to Factory Service Manuals

Need Help with the P1413 GMC Code?

Get the P1413 GMC code diagnosed by a professional: Find a repair shop in your area

Code P1413 GMC comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P1413 GMC code? Have you replaced any parts?
Any information is appreciated. Thanks