Exhaust Gas Recirculation Valve harness is open or shorted
Exhaust Gas Recirculation Valve circuit poor electrical connection
Faulty Engine Control Module (ECM)
How do I Fix the Code P140F Cadillac?
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Does your Cadillac have Safety Recalls? → Check here
What is the Cost to Diagnose the Code P140F Cadillac?
Labor: 1.0
The cost of diagnosing the P140F Cadillac code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
What are Code P140F Cadillac Possible Symptoms?
Engine Light ON (or Service Engine Soon Warning Light)
Code P140F Cadillac Description
The Engine Control Module (ECM) supplies the Exhaust Gas Recirculation (EGR) valve with a 5 V reference circuit, a low reference circuit, an H-bridge motor directional control circuit, and a signal circuit. The EGR position sensor provides a signal voltage that changes relative to the EGR position. The EGR position sensor information is transmitted between the EGR valve and the ECM on the signal circuit. The Mass Air Flow (MAF) sensor signal is used by the ECM to detect the proper amount of EGR flow. The ECM will close the EGR valve, then open the EGR valve to 100%. The ECM will then calculate the MAF difference and determine if the proper EGR flow has been detected. The Diagnostic Trouble Code (DTC) will be set when the ECM detects excessive current flow to the EGR motor for greater than 2.5 s. P140F Cadillac Code - Exhaust Gas Recirculation Current Performance
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P140F Cadillac code? Have you replaced any parts? Any information is appreciated. Thanks
