AutoCodes – Ford – P1409 2011 Ford Fusion

P1409 2011 Ford Fusion Code - EGR Vacuum Regulator Solenoid Circuit

Quick Answer

This test checks the electrical function of the EGR vacuum regulator solenoid. Common causes include Faulty EGR Vacuum Regulator (EVR) Solenoid, EGR Vacuum Regulator Solenoid harness is open or shorted, EGR Vacuum Regulator Solenoid circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P1409 2011 Ford Fusion indicates EGR Vacuum Regulator Solenoid Circuit.
Common causes: Common causes include Faulty EGR Vacuum Regulator (EVR) Solenoid, EGR Vacuum Regulator Solenoid harness is open or shorted, EGR Vacuum Regulator Solenoid circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,664

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 20, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1409 2011 Ford Fusion Description

This test checks the electrical function of the EGR vacuum regulator solenoid. The test fails when the EGR Vacuum Regulator (EVR) circuit voltage is either too high or too low when compared to the expected voltage range. The EGR system must be enabled for the test to be completed.

OBDII Code P1409 2011 Ford Fusion - EGR Vacuum Regulator Solenoid Circuit - AutoCodes.com — P1409 2011 Ford Fusion Code - EGR Vacuum Regulator Solenoid Circuit

What does this mean?

What are the Possible Causes of the DTC P1409 2011 Ford Fusion?

Faulty EGR Vacuum Regulator (EVR) Solenoid
EGR Vacuum Regulator Solenoid harness is open or shorted
EGR Vacuum Regulator Solenoid circuit poor electrical connection

How to Fix the DTC P1409 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1409 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1409 2011 Ford Fusion code?

Need more information on how to fix the P1409 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1409 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1409 2011 Ford Fusion Code

1. What does OBDII code P1409 on a 2011 Ford Fusion indicate?

The P1409 code specifically relates to the EGR (Exhaust Gas Recirculation) Vacuum Regulator Solenoid Circuit.

2. What are common symptoms associated with OBDII code P1409 on a 2011 Ford Fusion?

Common symptoms may include rough idling, engine stalling, decreased fuel efficiency, and the illumination of the check engine light.

3. What are possible causes of OBDII code P1409 on a 2011 Ford Fusion?

Potential causes include a faulty EGR vacuum regulator solenoid, wiring issues in the EGR system, vacuum leaks, or a malfunctioning EGR valve.

4. How can I diagnose the EGR vacuum regulator solenoid circuit issue causing OBDII code P1409 on a 2011 Ford Fusion?

Diagnostic steps may involve checking the EGR system components for visible damage, testing the solenoid with a multimeter, inspecting wiring for continuity, and ensuring proper vacuum levels.

5. Can I continue to drive my 2011 Ford Fusion with OBDII code P1409 present?

While the vehicle may still be operable, it is recommended to address the issue promptly to prevent potential damage to the engine or emissions system.

6. How can I repair OBDII code P1409 on my 2011 Ford Fusion?

Repair options may include replacing the EGR vacuum regulator solenoid, repairing damaged wiring, fixing vacuum leaks, or cleaning/replacing the EGR valve.

7. Are there any DIY tips for fixing OBDII code P1409 on a 2011 Ford Fusion?

For those with automotive repair experience, DIY tips may include carefully inspecting and cleaning EGR system components, checking and securing wiring connections, and using a code reader to reset the error code after repairs.

8. How much does it typically cost to repair OBDII code P1409 on a 2011 Ford Fusion at a professional auto repair shop?

Costs can vary depending on the exact cause of the issue, but expect to pay for diagnostic time, parts such as the solenoid or wiring, and labor for the repair. Estimates can range from $100 to $500 or more.

9. Will resetting the check engine light clear OBDII code P1409 on a 2011 Ford Fusion?

Resetting the check engine light may temporarily clear the code, but if the underlying issue causing P1409 is not addressed, the code is likely to reappear after driving cycles.

10. How can I prevent OBDII code P1409 from recurring on my 2011 Ford Fusion?

Regular maintenance, such as inspecting and cleaning the EGR system components, checking for vacuum leaks, and addressing any wiring issues promptly, can help prevent the reoccurrence of this code.