P1407 Mercury Code - Exhaust Gas Recirculation Flow Out Of Self-Test Range
Quick Answer
The Exhaust Gas Recirculation (EGR) system recirculates a portion of the exhaust gasses into the intake manifold under average vehicle driving conditions to reduce combustion temperatures and exhaust gas NOx content. Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Exhaust Gas Recirculation (EGR) Valve Vacuum hose off or defective, Plugged Exhaust Gas Recirculation (EGR) Valve. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1407 Mercury indicates Exhaust Gas Recirculation Flow Out Of Self-Test Range.
- Common causes
- Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Exhaust Gas Recirculation (EGR) Valve Vacuum hose off or defective, Plugged Exhaust Gas Recirculation (EGR) Valve.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P1407 Mercury Description
This test is performed during the Key On Engine Running (KOER) on demand self-test only. The EGR system is commanded ON at a fixed engine speed. The test fails and the Diagnostic Trouble Code (DTC) is output when the measured EGR flow falls above or below the required calibration.
What are the Possible Causes of the DTC P1407 Mercury?
- Faulty Exhaust Gas Recirculation (EGR) Valve
- Exhaust Gas Recirculation (EGR) Valve Vacuum hose off or defective
- Plugged Exhaust Gas Recirculation (EGR) Valve
How to Fix the DTC P1407 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1407 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1407 Mercury code?
Need more information on how to fix the P1407 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1407 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1407 Mercury Code
1. What are the common symptoms of OBDII code P1407 on a Mercury?
- Common symptoms include rough idling, engine hesitation, decreased fuel efficiency, and the illumination of the Check Engine Light.
2. What can cause the OBDII code P1407 on a Mercury?
- The code can be triggered by a faulty Exhaust Gas Recirculation (EGR) valve, a clogged EGR passage, or issues with the EGR system components.
3. How serious is the OBDII code P1407 on a Mercury?
- While the code may not cause immediate harm to the vehicle, it can lead to reduced engine performance and increased emissions if left unresolved.
4. Can a clogged EGR valve be cleaned to fix the P1407 code on a Mercury?
- Yes, in some cases, a clogged EGR valve can be cleaned to resolve the issue. However, if cleaning does not work, the valve may need to be replaced.
5. How can I troubleshoot the OBDII code P1407 on my Mercury?
- To troubleshoot the code, you can visually inspect the EGR system for leaks, test the EGR valve for proper operation, and check for any vacuum hose connections.
6. Is it safe to drive with the OBDII code P1407 illuminated on a Mercury?
- It is generally safe to drive with the code present, but it is recommended to address the issue promptly to prevent potential long-term engine damage.
7. What are the repair options for fixing the OBDII code P1407 on a Mercury?
- Repair options include cleaning or replacing the EGR valve, clearing any blockages in the EGR passages, checking and replacing vacuum hoses, or addressing any electrical issues in the EGR system.
8. Can a DIY enthusiast fix the OBDII code P1407 on a Mercury?
- Depending on the level of expertise, DIY enthusiasts may be able to address the issue by cleaning or replacing the EGR valve and performing basic troubleshooting steps.
9. Will resetting the Check Engine Light make the OBDII code P1407 go away on a Mercury?
- Resetting the Check Engine Light may temporarily turn it off, but if the underlying issue causing the P1407 code is not fixed, the light is likely to come back on.
10. How can I prevent the recurrence of the OBDII code P1407 on my Mercury?
- To prevent the code from reoccurring, it is essential to perform regular maintenance on the EGR system, such as cleaning the EGR valve and ensuring proper functioning of all components.
Discuss the causes and fixes for P1407 Mercury OBDII Code
Code P1407 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.