AutoCodesHonda – P1406 Honda

P1406 Honda Code - Exhaust Gas Recirculation Valve Position Sensor Circuit Problem

Quick Answer

P1406 Honda indicates Exhaust Gas Recirculation Valve Position Sensor Circuit Problem. Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve Position Sensor, EGR Valve Position Sensor harness is open or shorted, EGR Valve Position Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P1406 Honda indicates Exhaust Gas Recirculation Valve Position Sensor Circuit Problem.
Common causes
Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve Position Sensor, EGR Valve Position Sensor harness is open or shorted, EGR Valve Position Sensor circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,784
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 20, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1406 Honda Description

OBDII Code P1406 Honda - Exhaust Gas Recirculation Valve Position Sensor Circuit Problem - AutoCodes.com
P1406 Honda Code - Exhaust Gas Recirculation Valve Position Sensor Circuit Problem

What are the Possible Causes of the DTC P1406 Honda?

  • Faulty Exhaust Gas Recirculation (EGR) Valve Position Sensor
  • EGR Valve Position Sensor harness is open or shorted
  • EGR Valve Position Sensor circuit poor electrical connection

How to Fix the DTC P1406 Honda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1406 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1406 Honda code?

Need more information on how to fix the P1406 Honda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1406 Honda code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1406 Honda Code

What does the OBDII code P1406 mean for a Honda?

The P1406 code indicates a problem with the Exhaust Gas Recirculation (EGR) valve position sensor circuit, which monitors the EGR valve's performance.

What are the symptoms of code P1406 on a Honda?

Common symptoms include poor engine performance, rough idle, reduced fuel efficiency, and the illumination of the check engine light.

What causes the P1406 code on a Honda?

Possible causes include a faulty EGR valve position sensor, wiring issues in the sensor circuit, carbon buildup in the EGR valve, or a damaged EGR valve.

Can driving with code P1406 damage my Honda?

While the car may remain drivable, prolonged driving with this code can lead to increased emissions, engine performance issues, and potential damage to other components if left unresolved.

How can I diagnose the P1406 code on a Honda?

Inspect the EGR valve and position sensor for damage, check the wiring and connections for faults, and test the sensor using a multimeter to verify proper operation.

How do I fix code P1406 on a Honda?

Repairs may include cleaning or replacing the EGR valve, replacing the EGR position sensor, repairing damaged wiring, or updating the vehicle’s ECU software if needed.

How much does it cost to fix the P1406 code on a Honda?

Repair costs vary but typically range from $150 to $500 depending on whether the EGR valve or position sensor needs replacement and labor costs.

Can I clean the EGR valve to resolve the P1406 code on a Honda?

Yes, carbon buildup is a common issue, and cleaning the EGR valve can sometimes resolve the code if the sensor and wiring are functional.

What tools are needed to fix the P1406 code on a Honda?

You may need a diagnostic scan tool, a multimeter for testing circuits, basic hand tools for removing components, and EGR valve cleaner if cleaning is required.

Does a faulty EGR valve affect emissions?

Yes, a faulty EGR valve can increase nitrogen oxide (NOx) emissions, negatively impacting the vehicle’s environmental performance.

Discuss the causes and fixes for P1406 Honda OBDII Code

Code P1406 Honda comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play