AutoCodesJeep – P1405 Jeep

P1405 Jeep Code - EGR Solenoid High

Quick Answer

The Exhaust Gas Recirculation (EGR) valve recirculates exhaust gas to the engine intake for increased efficiency, lower fuel consumption, and reduced NOx emissions. Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Faulty Exhaust Gas Recirculation Valve Solenoid, Exhaust Gas Recirculation valve carbon blockage. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1405 Jeep indicates EGR Solenoid High.
Common causes
Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Faulty Exhaust Gas Recirculation Valve Solenoid, Exhaust Gas Recirculation valve carbon blockage.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 364
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 18, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1405 Jeep Description

The Exhaust Gas Recirculation (EGR) valve recirculates exhaust gas to the engine intake for increased efficiency, lower fuel consumption, and reduced NOx emissions. The valve changes the air's chemical makeup by adding exhaust gas, which dilutes the mixture and lowers combustion temperatures, resulting in less NOx production. The valve has two primary settings: open and closed, depending on the engine's power requirements. EGR valves can also improve combustion efficiency, reduce pumping losses, and decrease diesel knock at idle.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects EGR flow or movement when it is not expected.
OBDII Code P1405 Jeep - EGR Solenoid High - AutoCodes.com
P1405 Jeep Code - EGR Solenoid High

What are the Possible Causes of the DTC P1405 Jeep?

  • Faulty Exhaust Gas Recirculation (EGR) Valve
  • Faulty Exhaust Gas Recirculation Valve Solenoid
  • Exhaust Gas Recirculation valve carbon blockage

How to Fix the DTC P1405 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1405 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1405 Jeep code?

Need more information on how to fix the P1405 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1405 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1405 Jeep Code

1. What does the OBDII code P1405 mean on a Jeep?

P1405 indicates an issue with the Exhaust Gas Recirculation (EGR) solenoid circuit, specifically a high voltage condition.

2. What are the common symptoms of the P1405 code on a Jeep?

Symptoms may include poor engine performance, rough idling, decreased fuel efficiency, and the check engine light being illuminated.

3. What causes the P1405 code on a Jeep?

Common causes include a faulty EGR solenoid, damaged wiring or connectors, a malfunctioning PCM, or carbon buildup in the EGR system.

4. Can I drive my Jeep with the P1405 code?

While the vehicle may still be drivable, continued operation can lead to reduced performance and potential long-term engine damage if the issue is not addressed.

5. How do I diagnose the P1405 code on a Jeep?

Start by inspecting the EGR solenoid, wiring, and connectors for damage or corrosion. Use a multimeter to test the solenoid and check for proper voltage and resistance.

6. How do I fix the P1405 error code on a Jeep?

Repairs may include replacing the EGR solenoid, cleaning the EGR passages, repairing damaged wiring, or replacing the PCM if necessary.

7. Is the P1405 code unique to Jeeps?

No, the P1405 code can appear in other vehicles, but the specific diagnosis and repair steps may vary depending on the make and model.

8. How much does it cost to repair the P1405 code on a Jeep?

Repair costs can range from $100 to $300, depending on whether the issue is a simple solenoid replacement or involves additional repairs like wiring fixes.

9. What tools are needed to troubleshoot the P1405 code on a Jeep?

You’ll need an OBDII scanner, a multimeter, and possibly basic hand tools to access and test the EGR solenoid and related components.

10. Can a clogged EGR valve trigger the P1405 code on a Jeep?

Yes, a clogged EGR valve or passages can cause improper EGR operation, potentially leading to a P1405 code.

Discuss the causes and fixes for P1405 Jeep OBDII Code

Code P1405 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play