P1402 Ford Code - EGR Metering Orifice Restricted
Quick Answer
Diagnostic trouble code (DTC) P1402 indicates a malfunction in the Engine Gas Recirculation (EGR) valve position (EVP) sensor circuit. Common causes include Faulty Engine Gas Recirculation (EGR) sensor, Faulty Engine Gas Recirculation (EGR) valve, Engine Gas Recirculation (EGR) sensor harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1402 Ford indicates EGR Metering Orifice Restricted.
- Common causes
- Common causes include Faulty Engine Gas Recirculation (EGR) sensor, Faulty Engine Gas Recirculation (EGR) valve, Engine Gas Recirculation (EGR) sensor harness is open or shorted.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P1402 Ford Description
What are the Possible Causes of the DTC P1402 Ford?
- Faulty Engine Gas Recirculation (EGR) sensor
- Faulty Engine Gas Recirculation (EGR) valve
- Engine Gas Recirculation (EGR) sensor harness is open or shorted
- Engine Gas Recirculation (EGR) sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P1402 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1402 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1402 Ford code?
Need more information on how to fix the P1402 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1402 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1402 Ford Code
1. What are the common symptoms of OBDII code P1402 in a Ford related to EGR Metering Orifice Restricted?
- Common symptoms include rough idling, engine hesitation, decreased fuel efficiency, and potentially increased emissions.
2. What causes the OBDII code P1402 in a Ford related to EGR Metering Orifice Restricted?
- This code is usually triggered by a restriction or blockage in the EGR (Exhaust Gas Recirculation) system's metering orifice.
3. How can I diagnose the EGR Metering Orifice restriction causing OBDII code P1402 in my Ford?
- You can start by inspecting the EGR valve and associated components for carbon buildup and blockages. Use a scan tool to monitor EGR system performance.
4. Can a dirty or clogged EGR Valve lead to the OBDII code P1402 Ford EGR Metering Orifice Restricted?
- Yes, a dirty or clogged EGR valve can disrupt the flow of exhaust gases, potentially leading to the restriction causing this code.
5. What are some repair tips for resolving the EGR Metering Orifice restriction causing OBDII code P1402 in a Ford?
- Cleaning or replacing the EGR valve, clearing any blockages in the EGR system, and ensuring proper EGR system operation can help resolve this issue.
6. Are there any potential long-term effects of ignoring OBDII code P1402 related to EGR Metering Orifice Restricted in a Ford?
- Ignoring this code can lead to poor engine performance, increased emissions, and potential damage to other engine components over time.
7. Does the EGR system need to be completely replaced if OBDII code P1402 Ford EGR Metering Orifice Restricted is detected?
- In many cases, the issue can be resolved by cleaning or replacing the affected components rather than replacing the entire EGR system.
8. Can a DIY enthusiast fix OBDII code P1402 related to EGR Metering Orifice Restricted in a Ford?
- Depending on their experience level, DIY enthusiasts can attempt to diagnose and address this issue by following a repair manual or online guides.
9. Is it safe to continue driving my Ford with OBDII code P1402 EGR Metering Orifice Restricted until I can repair it?
- It's recommended to address the issue promptly to prevent further damage and ensure optimal engine performance and emissions compliance.
10. Will resetting the OBDII code P1402 related to EGR Metering Orifice Restricted in my Ford make the issue go away permanently?
- Simply resetting the code without addressing the underlying cause, such as a restricted EGR metering orifice, will likely result in the code reappearing.
Discuss the causes and fixes for P1402 Ford OBDII Code
-
hi i dont have any lights on in bord but this code reappear again after that i cleared. Appear togheder with P2458. What can i check or repair to clear codes?
Thanks in advance, -
I have the same codes does anybody know of a fix? p1402 and p2458, ford focus 07 tdci
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
