P1400 Jeep Code - Aftermarket Calibration Detected
Quick Answer
Aftermarket Calibration Detected/Warranty Coverage Confirmation Required. Common causes include Powertrain Control Module (PCM) programming, Faulty Powertrain Control Module. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1400 Jeep indicates Aftermarket Calibration Detected.
- Common causes
- Common causes include Powertrain Control Module (PCM) programming, Faulty Powertrain Control Module.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P1400 Jeep Description
What are the Possible Causes of the DTC P1400 Jeep?
- Powertrain Control Module (PCM) programming
- Faulty Powertrain Control Module
How to Fix the DTC P1400 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1400 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1400 Jeep code?
Need more information on how to fix the P1400 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1400 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1400 Jeep Code
1. What does OBDII code P1400 for Jeep mean?
This code indicates that the vehicle's computer has detected an aftermarket calibration.
2. What are the common symptoms of OBDII code P1400 in a Jeep?
Common symptoms include the check engine light illuminating, reduced engine performance, and potential drivability issues.
3. What can cause the OBDII code P1400 in a Jeep?
The most common cause of this code is the installation of a non-factory or aftermarket calibration on the vehicle's engine computer.
4. How can I diagnose the OBDII code P1400 in my Jeep?
Diagnosing this code typically involves using a diagnostic scanner to read the code and determine if an aftermarket calibration is the issue.
5. Can I continue driving my Jeep with the OBDII code P1400 present?
It is not recommended to continue driving your Jeep with this code present, as it can lead to potential engine performance issues.
6. How can I repair the OBDII code P1400 in my Jeep?
To repair this code, you may need to reflash the engine computer with the original factory calibration or seek assistance from a professional mechanic.
7. Will resetting the check engine light make the OBDII code P1400 go away?
Simply resetting the check engine light may not resolve the underlying issue causing the code. It is essential to address the root cause of the problem.
8. Can using a performance tuner or chip trigger the OBDII code P1400 in a Jeep?
Yes, using a performance tuner or chip that alters the factory calibration can trigger the P1400 code.
9. Are there any safety concerns associated with the OBDII code P1400 in a Jeep?
While the code itself may not pose an immediate safety risk, unresolved engine performance issues could potentially lead to unsafe driving conditions.
10. How can I prevent the OBDII code P1400 from coming back in my Jeep?
To prevent the recurrence of this code, avoid installing aftermarket calibrations and ensure that any modifications made to the vehicle's engine are compatible with its onboard computer system.
Discuss the causes and fixes for P1400 Jeep OBDII Code
Code P1400 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
