P1389 Audi Code - Engine Control Module 2 Defective
Quick Answer
P1389 Audi indicates Engine Control Module 2 Defective. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1389 Audi indicates Engine Control Module 2 Defective.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1389 Audi Description
What are the Possible Causes of the DTC P1389 Audi?
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P1389 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1389 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1389 Audi code?
Need more information on how to fix the P1389 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1389 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1389 Audi Code
What does OBDII code P1389 for an Audi mean?
Code P1389 indicates that the Engine Control Module 2 (ECM2) is defective or has detected an internal fault.
What are the common symptoms of code P1389 in an Audi?
Symptoms may include engine misfires, poor performance, stalling, difficulty starting, or the Check Engine Light illuminating.
What causes the P1389 code to appear in an Audi?
Common causes include a faulty secondary ECM, wiring issues, poor electrical connections, or internal component failures in the ECM.
Can a weak battery cause the P1389 code?
Yes, low voltage or a weak battery can interfere with ECM operation and potentially trigger the P1389 code.
How is the P1389 code diagnosed?
A mechanic will use a scan tool to confirm the code, inspect wiring and connections to the secondary ECM, and test the ECM for internal faults.
Can I drive my Audi with the P1389 code?
It is not recommended to drive with this code active, as it may cause engine performance issues or lead to further damage.
How do you fix code P1389 on an Audi?
Repairs may include replacing the secondary ECM, repairing damaged wiring or connectors, or addressing any voltage supply issues.
Does the P1389 code always mean the ECM needs replacement?
Not always. The issue could stem from wiring, connectors, or other related components rather than the ECM itself.
How much does it cost to repair the P1389 code in an Audi?
Repair costs vary, but ECM replacement can range from $500 to $1,500, while wiring repairs may be less expensive.
Can I reset the P1389 code without fixing the issue?
Resetting the code without addressing the underlying problem may cause it to return and could lead to further engine issues.
Discuss the causes and fixes for P1389 Audi OBDII Code
Code P1389 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
