AutoCodesAudi – P1370 Audi

P1370 Audi Code - Cylinder 6 Ignition Circuit Open

Quick Answer

P1370 Audi indicates Cylinder 6 Ignition Circuit Open. Common causes include Faulty Ignition Coil, Ignition Coil harness is open or shorted, Ignition Coil circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1370 Audi indicates Cylinder 6 Ignition Circuit Open.
Common causes
Common causes include Faulty Ignition Coil, Ignition Coil harness is open or shorted, Ignition Coil circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 8,464
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 16, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1370 Audi Description

OBDII Code P1370 Audi - Cylinder 6 Ignition Circuit Open - AutoCodes.com
P1370 Audi Code - Cylinder 6 Ignition Circuit Open

What are the Possible Causes of the DTC P1370 Audi?

  • Faulty Ignition Coil
  • Ignition Coil harness is open or shorted
  • Ignition Coil circuit poor electrical connection

How to Fix the DTC P1370 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1370 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1370 Audi code?

Need more information on how to fix the P1370 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1370 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1370 Audi Code

1. What does the OBDII code P1370 mean for an Audi?

P1370 indicates an open circuit in the ignition system for cylinder 6, meaning the electrical flow to the ignition coil or related components is interrupted.

2. What are the symptoms of code P1370 in an Audi?

Common symptoms include engine misfires, rough idling, reduced power, poor fuel efficiency, and possibly a check engine light.

3. What causes the P1370 code in an Audi?

Typical causes include a faulty ignition coil, damaged wiring or connectors, a failed spark plug, or issues with the engine control module (ECM).

4. Can I still drive my Audi with the P1370 code?

Driving with this code is not recommended as misfires can cause further damage to the engine and catalytic converter over time.

5. How do I diagnose the P1370 code on my Audi?

Start by inspecting the ignition coil, spark plug, and related wiring for cylinder 6. Use a multimeter to test for continuity and voltage to identify any open circuits.

6. How do I fix the P1370 code in an Audi?

Repairs may involve replacing the faulty ignition coil, spark plug, or repairing damaged wiring. In rare cases, the ECM may need reprogramming or replacement.

7. How much does it typically cost to fix the P1370 code on an Audi?

Repair costs vary but may range from $100 to $300 for parts and labor, depending on whether it’s a simple coil replacement or more extensive wiring repairs.

8. Can a bad spark plug cause the P1370 code in an Audi?

Yes, a damaged or worn-out spark plug can disrupt the ignition circuit and trigger this code.

9. What tools are needed to fix the P1370 code on an Audi?

You’ll need an OBDII scanner, multimeter, basic hand tools, and possibly replacement parts like an ignition coil or spark plug.

10. Will clearing the P1370 code with a scanner solve the issue?

Clearing the code may turn off the check engine light temporarily, but it won’t fix the underlying problem causing the open circuit. Repairs are necessary.

Discuss the causes and fixes for P1370 Audi OBDII Code

Code P1370 Audi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play