AutoCodes – GMC – P135B 2014 GMC Sierra

P135B 2014 GMC Sierra Code - Ignition Coil Supply Voltage Circuit Bank 2

Quick Answer

The ignition system uses an individual ignition coil for each cylinder. Common causes include Blown Ignition Coil Fuse, Ignition Coil Fuse harness is open or shorted, Ignition Coil Fuse circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P135B 2014 GMC Sierra indicates Ignition Coil Supply Voltage Circuit Bank 2.
Common causes
Common causes include Blown Ignition Coil Fuse, Ignition Coil Fuse harness is open or shorted, Ignition Coil Fuse circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 328
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 13, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P135B 2014 GMC Sierra Description

The ignition system uses an individual ignition coil for each cylinder. The Engine Control Module (ECM) monitors the ignition voltage from the fuse to the individual coils. The Diagnostic Trouble Code (DTC) will be set if the ECM detects less than 2.5 V on the ignition coil supply voltage circuit.
OBDII Code P135B 2014 GMC Sierra - Ignition Coil Supply Voltage Circuit Bank 2 - AutoCodes.com
P135B 2014 GMC Sierra Code - Ignition Coil Supply Voltage Circuit Bank 2

What are the Possible Causes of the DTC P135B 2014 GMC Sierra?

  • Blown Ignition Coil Fuse
  • Ignition Coil Fuse harness is open or shorted
  • Ignition Coil Fuse circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P135B 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P135B 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P135B 2014 GMC Sierra code?

Need more information on how to fix the P135B 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P135B 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P135B 2014 GMC Sierra Code

What does the OBDII code P135B mean on a 2014 GMC Sierra?

P135B indicates an issue with the ignition coil supply voltage circuit for Bank 2, meaning there may be a fault in the electrical supply to one or more ignition coils on that side of the engine.

What are the common symptoms of code P135B in a 2014 GMC Sierra?

Symptoms may include engine misfires, rough idling, poor acceleration, reduced fuel efficiency, and the check engine light being illuminated.

What causes the P135B code to appear on a 2014 GMC Sierra?

Possible causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, a blown fuse, or a malfunctioning engine control module (ECM).

Can I drive my 2014 GMC Sierra with the P135B code?

Driving with this code is not recommended, as it can cause engine misfires and potentially lead to further damage to the engine or catalytic converter if left unresolved.

How do I diagnose the P135B code on a 2014 GMC Sierra?

Diagnosis involves inspecting the ignition coil wiring and connectors for damage, testing the ignition coils, checking fuses, and scanning the ECM for further related codes.

What tools are needed to fix the P135B code on a 2014 GMC Sierra?

Tools may include a multimeter for electrical testing, an OBDII scanner for diagnostics, and basic hand tools like wrenches and screwdrivers to access ignition components.

How much does it cost to repair the P135B code on a 2014 GMC Sierra?

Repair costs can vary, but replacing a single ignition coil typically ranges from $100 to $300, while fixing wiring or ECM issues may cost more depending on the extent of the damage.

Can a faulty ECM cause the P135B code in a 2014 GMC Sierra?

Yes, a malfunctioning ECM can fail to properly control the ignition coil supply voltage, triggering the P135B code.

How can I prevent the P135B code from occurring in the future?

Regular maintenance, including inspecting ignition system components and addressing minor issues promptly, can help prevent this code from appearing.

Is the P135B code specific to Bank 2 of the engine?

Yes, the P135B code specifically refers to an issue with the ignition coil supply voltage circuit on Bank 2, which is the side of the engine opposite Bank 1.

Discuss the causes and fixes for P135B 2014 GMC Sierra OBDII Code

Code P135B 2014 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play