AutoCodes – Ford – P1358 Ford

P1358 Ford Code - Ignition Diagnostic Monitor Signal Out of Self-Test Range

Quick Answer

P1358 Ford indicates Ignition Diagnostic Monitor Signal Out of Self-Test Range. Common causes include Faulty Pick-up coil or crankshaft position sensor, Faulty Ignition Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1358 Ford indicates Ignition Diagnostic Monitor Signal Out of Self-Test Range.
Common causes: Common causes include Faulty Pick-up coil or crankshaft position sensor, Faulty Ignition Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 18,583

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 17, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1358 Ford Description

OBDII Code P1358 Ford - Ignition Diagnostic Monitor Signal Out of Self-Test Range - AutoCodes.com — P1358 Ford Code - Ignition Diagnostic Monitor Signal Out of Self-Test Range

What does this mean?

What are the Possible Causes of the DTC P1358 Ford?

Faulty Pick-up coil or crankshaft position sensor
Faulty Ignition Control Module

How to Fix the DTC P1358 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1358 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1358 Ford code?

Need more information on how to fix the P1358 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1358 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1358 Ford Code

1. What are the common symptoms of OBDII code P1358 in a Ford vehicle?

- Common symptoms include rough idling, engine misfires, difficulty starting the engine, and a decrease in overall engine performance.

2. What are the possible causes of OBDII code P1358 in a Ford vehicle?

- The code P1358 typically indicates a fault with the Ignition Diagnostic Monitor Signal, which can be caused by issues with the ignition system, such as faulty spark plugs, ignition coils, or wiring.

3. How can I diagnose OBDII code P1358 in my Ford vehicle?

- To diagnose code P1358, you can start by checking the ignition system components for any visible damage or wear. It's also recommended to use an OBDII scanner to retrieve specific diagnostic trouble codes.

4. Can a DIY enthusiast repair OBDII code P1358 in a Ford vehicle?

- Repairing code P1358 usually involves replacing or repairing faulty ignition system components, which can be a DIY task for enthusiasts with some mechanical experience. However, if in doubt, it's best to consult a professional mechanic.

5. Are there any tips for repairing OBDII code P1358 in a Ford vehicle?

- When repairing code P1358, make sure to thoroughly inspect and test each component of the ignition system to identify the root cause of the issue. Also, ensure proper installation and secure connections to avoid future problems.

6. Will driving with OBDII code P1358 in a Ford vehicle cause further damage?

- Continuing to drive with code P1358 may lead to more severe engine performance issues, such as increased fuel consumption, engine overheating, or potential damage to the catalytic converter. It's recommended to address the issue promptly.

7. How much does it typically cost to repair OBDII code P1358 in a Ford vehicle?

- The cost of repairing code P1358 can vary depending on the specific cause of the issue, the labor rates in your area, and whether you choose to replace the components yourself or have them professionally repaired. It's best to obtain quotes from local mechanics.

8. Is it safe to clear the OBDII code P1358 and continue driving the Ford vehicle?

- Clearing the code without addressing the underlying issue may temporarily turn off the check engine light, but it won't fix the problem causing code P1358. It's not advisable to ignore the code and continue driving without proper diagnosis and repair.

9. Can extreme weather conditions contribute to triggering OBDII code P1358 in a Ford vehicle?

- Extreme weather conditions, such as high humidity or temperature fluctuations, can potentially exacerbate existing issues with the ignition system and contribute to triggering code P1358. It's important to maintain the vehicle properly in all weather conditions.

10. How long does it typically take to repair OBDII code P1358 in a Ford vehicle?

- The time required to repair code P1358 can vary based on the complexity of the issue and the availability of parts. Simple repairs may take a few hours, while more extensive diagnostics and repairs could take longer.