AutoCodes – Toyota – P1350 Toyota

P1350 Toyota Code - VVT Sensor Circuit Malfunction Bank 2

Quick Answer

Variable Valve Timing (VVT) system controls the intake valve timing to proper timing in response to driving condition. Common causes include Dirty or low engine oil, Valve timing, Oil control valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1350 Toyota indicates VVT Sensor Circuit Malfunction Bank 2.
Common causes
Common causes include Dirty or low engine oil, Valve timing, Oil control valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 22,879
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 17, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1350 Toyota Description

Variable Valve Timing (VVT) system controls the intake valve timing to proper timing in response to driving condition. The Engine Control Module (ECM) controls Oil Control Valve (OCV) to make the intake valve timing properly, and, oil pressure controlled with OCV is supplied to the VVT controller, and then, VVT controller changes relative position between the camshaft and the crankshaft.
OBDII Code P1350 Toyota - VVT Sensor Circuit Malfunction Bank 2 - AutoCodes.com
P1350 Toyota Code - VVT Sensor Circuit Malfunction Bank 2

What are the Possible Causes of the DTC P1350 Toyota?

  • Dirty or low engine oil
  • Valve timing
  • Oil control valve
  • Variable Valve Timing controller assembly
  • Engine Control Module (ECM)

How to Fix the DTC P1350 Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1350 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1350 Toyota code?

Need more information on how to fix the P1350 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1350 Toyota code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1350 Toyota Code

1. What are the common symptoms of OBDII code P1350 related to VVT Sensor Circuit Malfunction Bank 2 in a Toyota?

- Common symptoms include engine misfires, rough idling, reduced fuel efficiency, and hesitation during acceleration.

2. What are the possible causes of OBDII code P1350 indicating a VVT Sensor Circuit Malfunction Bank 2 issue in a Toyota?

- Possible causes include a faulty VVT sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).

3. How can I diagnose the VVT Sensor Circuit Malfunction Bank 2 problem triggering OBDII code P1350 in my Toyota?

- You can diagnose the issue by performing a visual inspection of the sensor and its wiring, testing the sensor's resistance, and using a scan tool to monitor VVT sensor data.

4. Can driving with OBDII code P1350 indicating VVT Sensor Circuit Malfunction Bank 2 in a Toyota cause further damage?

- Continuing to drive with this issue can potentially lead to more severe engine problems, such as increased emissions, reduced performance, and even engine damage over time.

5. Is it safe to reset the OBDII code P1350 related to VVT Sensor Circuit Malfunction Bank 2 in my Toyota without addressing the underlying issue?

- It is not recommended to simply reset the code without fixing the root cause, as the problem will likely persist and may worsen over time.

6. How do I repair the VVT Sensor Circuit Malfunction Bank 2 problem triggering OBDII code P1350 in my Toyota?

- Repair involves replacing the faulty VVT sensor, repairing any damaged wiring or connectors, and ensuring proper connection to the ECM for accurate sensor readings.

7. Can a DIY enthusiast fix the VVT Sensor Circuit Malfunction Bank 2 issue causing OBDII code P1350 in a Toyota?

- While some DIY enthusiasts may be able to diagnose and replace the VVT sensor themselves, it is recommended to consult a professional mechanic for accurate diagnosis and repair.

8. Are there any preventive maintenance tips to avoid encountering OBDII code P1350 due to VVT Sensor Circuit Malfunction Bank 2 in a Toyota?

- Regularly inspecting and maintaining the VVT sensor, monitoring engine performance, and addressing any warning signs promptly can help prevent this issue.

9. How long does it typically take to repair the VVT Sensor Circuit Malfunction Bank 2 problem linked to OBDII code P1350 in a Toyota?

- The repair time can vary depending on the exact cause of the issue, but it generally takes a few hours to replace the VVT sensor and address any related wiring or connection problems.

10. Will fixing the VVT Sensor Circuit Malfunction Bank 2 issue causing OBDII code P1350 improve my Toyota's overall performance?

- Yes, resolving this issue will likely lead to smoother engine operation, improved fuel efficiency, and better overall performance of your Toyota.

Discuss the causes and fixes for P1350 Toyota OBDII Code

Code P1350 Toyota comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play