P1344 MINI Code - Misfire During Start Cylinder 2
Quick Answer
As part of the CARB/OBD regulations, the Engine Control Module (ECM) must determine if a misfire is occurring and also identify the specific cylinder(s) and the severity of the misfire event and whether it is emissions relevant or catalyst damaging. Common causes include Faulty Spark Plug, Faulty Ignition Coil, Intake vacuum leak. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1344 MINI indicates Misfire During Start Cylinder 2.
- Common causes
- Common causes include Faulty Spark Plug, Faulty Ignition Coil, Intake vacuum leak.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1344 MINI Description
The misfire/engine roughness calculation is derived from the differences in the period duration (T) of individual increment gear segments. Each segment period consists of an angular range of 120° crank angle that starts 78° before Top Dead Center (TDC).
If the expected period duration is greater than the permissible value a misfire fault for the particular cylinder is stored in the fault memory of the ECM. Depending on the level of misfire rate measured the control unit will illuminate the "Service Engine Soon" light, may cutoff fuel to the particular cylinder and may switch lambda operation to open-loop. All misfire faults are weighted to determine if the misfire is emissions relevant or catalyst damaging.
What are the Possible Causes of the DTC P1344 MINI?
- Faulty Spark Plug
- Faulty Ignition Coil
- Intake vacuum leak
- Faulty Camshaft Position Sensor
- Ignition Coil harness is open or shorted
- Ignition Coil circuit poor electrical connection
How to Fix the DTC P1344 MINI?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1344 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1344 MINI code?
Need more information on how to fix the P1344 MINI code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1344 MINI code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1344 MINI Code
What does OBDII code P1344 mean for a MINI?
P1344 indicates a misfire during the start phase in cylinder 2, which may affect engine performance and emissions.
What are the common symptoms of P1344 in a MINI?
Symptoms typically include rough idling, difficulty starting, poor acceleration, reduced fuel efficiency, and the check engine light illuminating.
What causes the P1344 code on a MINI?
Common causes include a faulty ignition coil, spark plug issues, fuel injector problems, vacuum leaks, or low cylinder compression.
Can driving with code P1344 damage my MINI?
Driving with P1344 can cause further damage to the engine or catalytic converter due to unburned fuel, so it's best to address the issue promptly.
How do I diagnose the P1344 code on my MINI?
Diagnosis involves checking cylinder 2’s spark plug, ignition coil, fuel injector, and performing a compression test to assess engine health.
How can I fix the P1344 code on a MINI?
Repairs may include replacing the spark plug or ignition coil for cylinder 2, cleaning or replacing the fuel injector, or fixing any vacuum leaks.
Can a dirty fuel injector cause the P1344 code?
Yes, a clogged or malfunctioning fuel injector in cylinder 2 can lead to improper fuel delivery and trigger the P1344 code.
Will replacing the spark plug fix the P1344 code?
If the spark plug in cylinder 2 is damaged or worn, replacing it may resolve the issue, but other components should also be inspected.
Is the P1344 code related to timing issues?
While timing problems are less common, incorrect engine timing or a stretched timing chain can occasionally contribute to misfires.
What tools are needed to troubleshoot the P1344 code on a MINI?
Tools include an OBDII scanner, a spark plug socket, a multimeter, fuel pressure gauge, and potentially a compression tester for deeper diagnosis.
Discuss the causes and fixes for P1344 MINI OBDII Code
Code P1344 MINI comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
