AutoCodes – Chevrolet – P133F 2018 Chevrolet Silverado

P133F 2018 Chevrolet Silverado Code - Cylinder 8 Glow Plug Offset Exceeded Learning Limit

Quick Answer

The Glow Plug Control Module has not learned the glow plug offset values. Common causes include Perform Glow Plug Learn procedure, Faulty Glow Plug 8, Glow Plug 8 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P133F 2018 Chevrolet Silverado indicates Cylinder 8 Glow Plug Offset Exceeded Learning Limit.
Common causes
Common causes include Perform Glow Plug Learn procedure, Faulty Glow Plug 8, Glow Plug 8 harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 534
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 30, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P133F 2018 Chevrolet Silverado Description

The Glow Plug Control Module has not learned the glow plug offset values. If a glow plug has been replaced and the glow plug learn was not performed, or if the Glow Plug Control Module experiences an Electronically Erasable Programmable Read Only Memory (EEPROM) error or data corruption, this Diagnostic Trouble Code (DTC) to set. The DTC will be set if the glow plug hot resistance is outside a predefined threshold.
OBDII Code P133F 2018 Chevrolet Silverado - Cylinder 8 Glow Plug Offset Exceeded Learning Limit - AutoCodes.com
P133F 2018 Chevrolet Silverado Code - Cylinder 8 Glow Plug Offset Exceeded Learning Limit

What are the Possible Causes of the DTC P133F 2018 Chevrolet Silverado?

  • Perform Glow Plug Learn procedure
  • Faulty Glow Plug 8
  • Glow Plug 8 harness is open or shorted
  • Glow Plug 8 circuit poor electrical connection

How to Fix the DTC P133F 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P133F 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P133F 2018 Chevrolet Silverado code?

Need more information on how to fix the P133F 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P133F 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P133F 2018 Chevrolet Silverado Code

What does OBDII code P133F mean on a 2018 Chevrolet Silverado?

P133F indicates that the offset value for Cylinder 8's glow plug has exceeded the learning limit set by the engine control module.

What are the symptoms of code P133F in a 2018 Chevrolet Silverado?

Common symptoms include difficulty starting the engine in cold weather, reduced engine performance, and the illumination of the check engine light.

What causes code P133F on a 2018 Chevrolet Silverado?

The code is typically caused by a malfunctioning glow plug for Cylinder 8, issues with the glow plug control module, or wiring/connectors related to the glow plug circuit.

Can code P133F affect engine performance in a 2018 Chevrolet Silverado?

Yes, the code can lead to poor cold-start performance and may cause rough idling or reduced fuel efficiency.

How can I diagnose code P133F on a 2018 Chevrolet Silverado?

Start by inspecting the glow plug for Cylinder 8 for damage or wear, check the wiring and connectors for corrosion or disconnection, and test the glow plug control module functionality.

Can I still drive my 2018 Chevrolet Silverado with code P133F?

You can drive the vehicle, but it may experience poor cold-start performance and reduced efficiency. It is best to address the issue promptly to prevent further complications.

How do I fix code P133F on a 2018 Chevrolet Silverado?

Repair steps may include replacing the faulty glow plug for Cylinder 8, repairing or replacing damaged wiring, or replacing the glow plug control module if necessary.

What tools are needed to fix code P133F on a 2018 Chevrolet Silverado?

You may need a diagnostic scanner, a multimeter for testing electrical connections, and basic hand tools for removing and installing glow plugs.

How much does it cost to fix code P133F on a 2018 Chevrolet Silverado?

The repair cost can range from $100 to $400, depending on whether you need to replace the glow plug, repair wiring, or replace the control module.

Can a faulty glow plug control module trigger code P133F on a 2018 Chevrolet Silverado?

Yes, if the glow plug control module fails to properly regulate the offset values, it can cause the code to appear.

Discuss the causes and fixes for P133F 2018 Chevrolet Silverado OBDII Code

Code P133F 2018 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play