AutoCodesGMC – P133B 2014 GMC Sierra

P133B 2014 GMC Sierra Code - Cylinder 4 Glow Plug Offset Exceeded Learning Limit

Quick Answer

The Glow Plug Control Module has not learned the glow plug offset values. Common causes include Perform Glow Plug Learn procedure, Faulty Glow Plug 4, Glow Plug 4 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P133B 2014 GMC Sierra indicates Cylinder 4 Glow Plug Offset Exceeded Learning Limit.
Common causes
Common causes include Perform Glow Plug Learn procedure, Faulty Glow Plug 4, Glow Plug 4 harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 139
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 30, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P133B 2014 GMC Sierra Description

The Glow Plug Control Module has not learned the glow plug offset values. If a glow plug has been replaced and the glow plug learn was not performed, or if the Glow Plug Control Module experiences an Electronically Erasable Programmable Read Only Memory (EEPROM) error or data corruption, this Diagnostic Trouble Code (DTC) to set. The DTC will be set if the glow plug hot resistance is outside a predefined threshold.
OBDII Code P133B 2014 GMC Sierra - Cylinder 4 Glow Plug Offset Exceeded Learning Limit - AutoCodes.com
P133B 2014 GMC Sierra Code - Cylinder 4 Glow Plug Offset Exceeded Learning Limit

What are the Possible Causes of the DTC P133B 2014 GMC Sierra?

  • Perform Glow Plug Learn procedure
  • Faulty Glow Plug 4
  • Glow Plug 4 harness is open or shorted
  • Glow Plug 4 circuit poor electrical connection

How to Fix the DTC P133B 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P133B 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P133B 2014 GMC Sierra code?

Need more information on how to fix the P133B 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P133B 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P133B 2014 GMC Sierra Code

What does the OBDII code P133B mean on a 2014 GMC Sierra?

The P133B code indicates that the glow plug offset for cylinder 4 has exceeded the learning limit, meaning the glow plug system is not functioning within the expected range for that cylinder.

What are the common symptoms of the P133B code?

Common symptoms include a check engine light, rough cold starts, decreased fuel efficiency, and potential misfiring in cylinder 4.

What causes the P133B code to appear?

The code is typically caused by a faulty glow plug in cylinder 4, wiring issues, a failing glow plug control module, or carbon build-up around the glow plug.

Can I drive my 2014 GMC Sierra with the P133B code?

While the truck may still run, driving with this code can lead to poor performance, harder cold starts, and potential damage to the engine if not addressed promptly.

How do you diagnose the P133B code?

Diagnosis involves scanning the vehicle with an OBDII tool, testing the resistance of the cylinder 4 glow plug, inspecting the wiring and connectors, and checking the glow plug control module.

How do you fix the P133B code?

Common fixes include replacing the cylinder 4 glow plug, cleaning or replacing damaged wiring, and, in some cases, replacing the glow plug control module.

What tools do I need to repair a P133B code?

You’ll need an OBDII scanner, a multimeter to test electrical resistance, and basic tools to replace the glow plug or repair wiring.

Does the P133B code always mean the glow plug is bad?

No, it can also indicate issues with the wiring, control module, or excessive carbon build-up around the glow plug.

How much does it cost to fix the P133B code?

Replacing a glow plug typically costs $100–$300, depending on parts and labor. Additional costs may apply if wiring or control module repairs are needed.

Can a P133B code cause long-term damage if not fixed?

Yes, ignoring this code can lead to harder cold starts, reduced engine efficiency, and potential damage to other engine components over time.

Discuss the causes and fixes for P133B 2014 GMC Sierra OBDII Code

Code P133B 2014 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play