P1336 2010 Ford Fusion Code - Crankshaft Position Or Camshaft Position Sensor Input Signal Error
Quick Answer
The Camshaft Position (CMP) sensor detects the position of the camshaft. Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 2010 Ford Fusion indicates Crankshaft Position Or Camshaft Position Sensor Input Signal Error.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1336 2010 Ford Fusion Description
The Crankshaft Position (CKP) sensor is a magnetic transducer mounted on the engine block adjacent to a pulse wheel located on the crankshaft. By monitoring the crankshaft mounted pulse wheel, the CKP sensor is the primary sensor for ignition information to the PCM.
The PCM monitors the CKP sensor and the CMP sensor. The Diagnostic Trouble Code (DTC) sets when the PCM has detected a synchronization or erratic signal from the CKP sensor or the CMP sensors.
What are the Possible Causes of the DTC P1336 2010 Ford Fusion?
- Faulty Crankshaft Position Sensor
- Faulty Camshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1336 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1336 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1336 2010 Ford Fusion code?
Need more information on how to fix the P1336 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 2010 Ford Fusion Code
1. What does the OBDII code P1336 mean on a 2010 Ford Fusion?
P1336 indicates a Crankshaft Position or Camshaft Position Sensor Input Signal Error, meaning the engine control module (ECM) is detecting an issue with the timing signal from these sensors.
2. What are the common symptoms of code P1336 in a 2010 Ford Fusion?
Common symptoms include engine misfires, rough idling, poor acceleration, reduced fuel efficiency, and difficulty starting the engine.
3. What causes the P1336 code to appear on a 2010 Ford Fusion?
The most common causes are a faulty crankshaft or camshaft position sensor, damaged wiring or connectors, timing chain issues, or a malfunctioning ECM.
4. Can a bad crankshaft position sensor trigger code P1336?
Yes, a bad crankshaft position sensor is one of the primary causes of the P1336 code, as it disrupts the timing signal needed for proper engine operation.
5. How do you diagnose a P1336 code on a 2010 Ford Fusion?
Diagnosis involves scanning for additional codes, inspecting the crankshaft and camshaft position sensors, checking the wiring and connectors for damage, and verifying proper engine timing.
6. Can driving with a P1336 code damage my 2010 Ford Fusion?
Driving with this code can lead to further engine damage or unsafe driving conditions if the engine misfires or stalls, so it’s best to address it promptly.
7. How do you fix the P1336 code on a 2010 Ford Fusion?
Repairs may include replacing the faulty crankshaft or camshaft position sensor, repairing damaged wiring, correcting timing chain issues, or reprogramming the ECM if necessary.
8. Could a loose timing chain cause the P1336 code?
Yes, a loose or stretched timing chain can cause timing signal errors, leading to the P1336 code.
9. Do I need to reprogram the ECM after fixing a P1336 code?
In some cases, reprogramming or resetting the ECM may be required after repairing the underlying issue to ensure proper communication with the sensors.
10. Is the P1336 code specific to Ford vehicles?
No, the P1336 code is a generic OBD-II code, but its specific symptoms and causes may vary slightly between manufacturers and models, including the 2010 Ford Fusion.
Discuss the causes and fixes for P1336 2010 Ford Fusion OBDII Code
Code P1336 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
