P1336 2009 Ford Fusion Code - Crankshaft Position Or Camshaft Position Sensor Input Signal Error
Quick Answer
The Camshaft Position (CMP) sensor detects the position of the camshaft. Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 2009 Ford Fusion indicates Crankshaft Position Or Camshaft Position Sensor Input Signal Error.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1336 2009 Ford Fusion Description
The Crankshaft Position (CKP) sensor is a magnetic transducer mounted on the engine block adjacent to a pulse wheel located on the crankshaft. By monitoring the crankshaft mounted pulse wheel, the CKP sensor is the primary sensor for ignition information to the PCM.
The PCM monitors the CKP sensor and the CMP sensor. The Diagnostic Trouble Code (DTC) sets when the PCM has detected a synchronization or erratic signal from the CKP sensor or the CMP sensors.
What are the Possible Causes of the DTC P1336 2009 Ford Fusion?
- Faulty Crankshaft Position Sensor
- Faulty Camshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1336 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1336 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1336 2009 Ford Fusion code?
Need more information on how to fix the P1336 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 2009 Ford Fusion Code
1. What does OBDII code P1336 mean on a 2009 Ford Fusion?
P1336 indicates a Crankshaft Position or Camshaft Position Sensor Input Signal Error, meaning the engine control module (ECM) has detected an issue with the signals from these sensors.
2. What are the symptoms of code P1336 in a Ford Fusion?
Common symptoms include difficulty starting the engine, engine stalling, rough idling, reduced performance, and the Check Engine Light illuminating.
3. What causes P1336 to appear in a 2009 Ford Fusion?
Possible causes include a faulty crankshaft or camshaft position sensor, damaged wiring or connectors, a misaligned timing belt or chain, or issues with the ECM.
4. Can a bad crankshaft position sensor cause P1336 in my Ford Fusion?
Yes, a malfunctioning crankshaft position sensor is a common cause of P1336, as it disrupts the synchronization of engine timing signals.
5. How do I diagnose P1336 in my 2009 Ford Fusion?
Use an OBDII scanner to confirm the code, then inspect the crankshaft and camshaft sensors, check for damaged wiring, and verify the timing alignment of the engine.
6. Can driving with code P1336 damage my 2009 Ford Fusion?
Driving with P1336 may lead to poor engine performance, stalling, and potential damage to engine components if the timing is off for an extended period.
7. How do I fix P1336 on my 2009 Ford Fusion?
Repairs may include replacing faulty sensors, repairing or replacing damaged wiring, resetting the engine timing, or reprogramming the ECM if necessary.
8. How much does it cost to fix P1336 on a 2009 Ford Fusion?
The repair cost depends on the issue but generally ranges from $100 to $300 for sensor replacement and higher if timing or ECM repairs are needed.
9. Can a loose timing belt cause P1336 in a Ford Fusion?
Yes, a loose or misaligned timing belt or chain can cause P1336 by disrupting the synchronization of the crankshaft and camshaft signals.
10. Will clearing the code fix P1336 on my Ford Fusion?
Clearing the code may turn off the Check Engine Light temporarily, but the underlying issue must be repaired to prevent the code from returning.
Discuss the causes and fixes for P1336 2009 Ford Fusion OBDII Code
Code P1336 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
