P1336 2007 Ford Fusion Code - Crankshaft Position Or Camshaft Position Sensor Input Signal Error
Quick Answer
The Camshaft Position (CMP) sensor detects the position of the camshaft. Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 2007 Ford Fusion indicates Crankshaft Position Or Camshaft Position Sensor Input Signal Error.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1336 2007 Ford Fusion Description
The Crankshaft Position (CKP) sensor is a magnetic transducer mounted on the engine block adjacent to a pulse wheel located on the crankshaft. By monitoring the crankshaft mounted pulse wheel, the CKP sensor is the primary sensor for ignition information to the PCM.
The PCM monitors the CKP sensor and the CMP sensor. The Diagnostic Trouble Code (DTC) sets when the PCM has detected a synchronization or erratic signal from the CKP sensor or the CMP sensors.
What are the Possible Causes of the DTC P1336 2007 Ford Fusion?
- Faulty Crankshaft Position Sensor
- Faulty Camshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1336 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1336 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1336 2007 Ford Fusion code?
Need more information on how to fix the P1336 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 2007 Ford Fusion Code
What does the OBDII code P1336 mean on a 2007 Ford Fusion?
P1336 indicates a Crankshaft Position Sensor or Camshaft Position Sensor Input Signal Error, meaning the engine control module (ECM) is detecting an issue with the timing signals from these sensors.
What are the common symptoms of code P1336 in a 2007 Ford Fusion?
Common symptoms include engine stalling, rough idling, difficulty starting, poor fuel economy, and the check engine light being illuminated.
What causes the P1336 code to appear in a 2007 Ford Fusion?
Potential causes include a faulty crankshaft position sensor, a faulty camshaft position sensor, damaged wiring or connectors, timing chain issues, or a failing ECM.
Can a bad crankshaft position sensor alone trigger the P1336 code?
Yes, a defective or malfunctioning crankshaft position sensor can independently cause the P1336 code to appear.
How do you diagnose the P1336 code in a 2007 Ford Fusion?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the crankshaft and camshaft position sensors, checking for damaged wiring or loose connections, and verifying proper engine timing.
Can I drive my 2007 Ford Fusion with the P1336 code?
Driving with the P1336 code is not recommended, as it can lead to engine stalling or further damage due to improper timing.
How is the P1336 code fixed on a 2007 Ford Fusion?
Repairs may include replacing the faulty crankshaft or camshaft position sensor, repairing damaged wiring, resetting the ECM, or addressing timing chain issues if needed.
How much does it cost to repair the P1336 code in a 2007 Ford Fusion?
The cost depends on the specific issue, but replacing a crankshaft or camshaft position sensor typically costs $150–$350, including parts and labor.
Can a timing chain problem cause the P1336 code to appear?
Yes, a stretched or misaligned timing chain can disrupt the timing signals and trigger the P1336 code.
Will clearing the P1336 code fix the issue?
Clearing the code may turn off the check engine light temporarily, but the underlying problem will persist until properly repaired.
Discuss the causes and fixes for P1336 2007 Ford Fusion OBDII Code
Code P1336 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
