P1336 2006 Ford Fusion Code - Crankshaft Position Or Camshaft Position Sensor Input Signal Error
Quick Answer
The Camshaft Position (CMP) sensor detects the position of the camshaft. Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 2006 Ford Fusion indicates Crankshaft Position Or Camshaft Position Sensor Input Signal Error.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1336 2006 Ford Fusion Description
The Crankshaft Position (CKP) sensor is a magnetic transducer mounted on the engine block adjacent to a pulse wheel located on the crankshaft. By monitoring the crankshaft mounted pulse wheel, the CKP sensor is the primary sensor for ignition information to the PCM.
The PCM monitors the CKP sensor and the CMP sensor. The Diagnostic Trouble Code (DTC) sets when the PCM has detected a synchronization or erratic signal from the CKP sensor or the CMP sensors.
What are the Possible Causes of the DTC P1336 2006 Ford Fusion?
- Faulty Crankshaft Position Sensor
- Faulty Camshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1336 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1336 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1336 2006 Ford Fusion code?
Need more information on how to fix the P1336 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 2006 Ford Fusion Code
1. What does the OBDII code P1336 mean on a 2006 Ford Fusion?
P1336 indicates a "Crankshaft Position or Camshaft Position Sensor Input Signal Error," meaning the signals from these sensors are inconsistent or missing.
2. What are the symptoms of code P1336 in a 2006 Ford Fusion?
Common symptoms include rough idling, stalling, engine misfires, poor acceleration, difficulty starting, and the Check Engine Light turning on.
3. What causes the P1336 code to appear on a 2006 Ford Fusion?
Possible causes include a faulty crankshaft or camshaft position sensor, damaged wiring or connectors, a failing PCM, or incorrect timing due to a worn timing chain or belt.
4. Can a faulty crankshaft position sensor alone trigger code P1336?
Yes, a malfunctioning crankshaft position sensor can cause signal errors that lead to the P1336 code.
5. How do I diagnose the P1336 code on a 2006 Ford Fusion?
Start by visually inspecting the crankshaft and camshaft sensors, connectors, and wiring for damage. Use a scan tool to monitor sensor signals and verify timing alignment.
6. Can I drive my 2006 Ford Fusion with code P1336 active?
Driving with this code is not recommended, as it can lead to engine stalling or further damage due to timing or signal issues.
7. How do I fix code P1336 on a 2006 Ford Fusion?
Repairs may involve replacing the faulty crankshaft or camshaft position sensor, repairing damaged wiring or connectors, or realigning the engine timing if necessary.
8. How much does it cost to fix a P1336 code on a 2006 Ford Fusion?
The cost varies depending on the issue, but replacing a crankshaft or camshaft sensor typically ranges from $100 to $300, including parts and labor.
9. Can a weak battery cause code P1336 in a 2006 Ford Fusion?
A weak or failing battery can cause voltage issues that may interfere with sensor signals, potentially triggering this code.
10. Is it necessary to reprogram the PCM after fixing the P1336 code?
In most cases, reprogramming the PCM is not required, but clearing the code and performing a drive cycle may be necessary to ensure the fix was successful.
Discuss the causes and fixes for P1336 2006 Ford Fusion OBDII Code
Code P1336 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
