P1336 2002 Ford F150 Code - Crankshaft Position Or Camshaft Position Sensor Input Signal Error
Quick Answer
The Camshaft Position (CMP) sensor detects the position of the camshaft. Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 2002 Ford F150 indicates Crankshaft Position Or Camshaft Position Sensor Input Signal Error.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1336 2002 Ford F150 Description
The Crankshaft Position (CKP) sensor is a magnetic transducer mounted on the engine block adjacent to a pulse wheel located on the crankshaft. By monitoring the crankshaft mounted pulse wheel, the CKP sensor is the primary sensor for ignition information to the PCM.
The PCM monitors the CKP sensor and the CMP sensor. The Diagnostic Trouble Code (DTC) sets when the PCM has detected a synchronization or erratic signal from the CKP sensor or the CMP sensors.
What are the Possible Causes of the DTC P1336 2002 Ford F150?
- Faulty Crankshaft Position Sensor
- Faulty Camshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1336 2002 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1336 2002 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1336 2002 Ford F150 code?
Need more information on how to fix the P1336 2002 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 2002 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 2002 Ford F150 Code
1. What does the OBDII code P1336 mean for a 2002 Ford F150?
It indicates a "Crankshaft Position or Camshaft Position Sensor Input Signal Error," meaning the engine control module (ECM) is not receiving a proper signal from one or both sensors.
2. What are the common symptoms of code P1336 in a 2002 Ford F150?
Symptoms may include engine misfires, difficulty starting, rough idling, poor acceleration, stalling, or the check engine light being illuminated.
3. What causes the P1336 code to appear on a 2002 Ford F150?
Potential causes include a faulty crankshaft position sensor, a damaged or misaligned camshaft position sensor, wiring issues, a failed timing chain, or a damaged reluctor wheel.
4. Can I drive my 2002 Ford F150 with the P1336 code?
It is not recommended to drive with this code because it can cause engine performance issues and lead to further damage if not addressed.
5. How do I diagnose the P1336 code on a 2002 Ford F150?
Start by inspecting the crankshaft and camshaft position sensors, checking for damaged wiring or connectors, and verifying proper alignment. A scan tool can be used to monitor sensor signals for irregularities.
6. What tools are needed to fix the P1336 code on a 2002 Ford F150?
Tools may include a scan tool or code reader, a multimeter for testing circuits, basic hand tools for sensor replacement, and possibly a timing light if timing alignment needs to be checked.
7. How much does it cost to fix the P1336 code on a 2002 Ford F150?
The cost depends on the exact issue. Replacing a crankshaft or camshaft position sensor can range from $100 to $300, while repairing timing-related issues may cost significantly more.
8. Can a bad timing chain cause the P1336 code in a 2002 Ford F150?
Yes, a worn or damaged timing chain can cause misalignment between the crankshaft and camshaft, leading to the P1336 code.
9. How do I reset the P1336 code on my 2002 Ford F150 after repairs?
After repairs, use an OBDII scan tool to clear the code, or disconnect the battery for about 10 minutes to reset the ECM. Ensure the issue is resolved to prevent the code from returning.
10. What happens if I ignore the P1336 code on my 2002 Ford F150?
Ignoring the code can lead to worsening engine performance, increased fuel consumption, potential engine damage, and failure to pass emissions tests.
Discuss the causes and fixes for P1336 2002 Ford F150 OBDII Code
-
Had code for bad camshaft sensor, replaced synchronizer and sensor. Now I'm having a bigger issue with 1336 code. Engine chokes out but has yet to stall , hear thunk noise as well, no take off power. How do I fix this
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
