P1335 1999 Toyota Camry Code - Crankshaft Position Sensor Circuit Fault
Quick Answer
Crankshaft Position Sensor (NE signal) consist of a signal plate and pick up coil. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position (CKP) Sensor harness is open or shorted, Crankshaft Position (CKP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1335 1999 Toyota Camry indicates Crankshaft Position Sensor Circuit Fault.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position (CKP) Sensor harness is open or shorted, Crankshaft Position (CKP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1335 1999 Toyota Camry Description
signals of every engine revolution. The Engine Control Module (ECM) detects the standard crankshaft angle based on the signals, and the actual crankshaft angle the engine speed by the NE signals.
What are the Possible Causes of the DTC P1335 1999 Toyota Camry?
- Faulty Crankshaft Position Sensor
- Crankshaft Position (CKP) Sensor harness is open or shorted
- Crankshaft Position (CKP) Sensor circuit poor electrical connection
- ECM
How to Fix the DTC P1335 1999 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1335 1999 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1335 1999 Toyota Camry code?
Need more information on how to fix the P1335 1999 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1335 1999 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1335 1999 Toyota Camry Code
1. What are the common symptoms of OBDII code P1335 in a 1999 Toyota Camry?
- Common symptoms include rough idle, stalling, difficulty starting the engine, and a decrease in overall engine performance.
2. What is the main cause of the P1335 code in a 1999 Toyota Camry?
- The main cause of the P1335 code is a fault in the crankshaft position sensor circuit, which can be due to sensor malfunction, wiring issues, or a faulty connection.
3. How can I diagnose the crankshaft position sensor circuit fault in my 1999 Toyota Camry?
- Diagnosing the issue involves using an OBDII scanner to retrieve the P1335 code, testing the crankshaft position sensor, inspecting the wiring for damage, and checking the sensor's connection.
4. Can I still drive my 1999 Toyota Camry with the P1335 code present?
- It is not recommended to continue driving the vehicle with the P1335 code present, as it can lead to further damage and potential safety hazards.
5. How do I repair the crankshaft position sensor circuit fault in my 1999 Toyota Camry?
- Repairing the issue typically involves replacing the crankshaft position sensor, repairing or replacing damaged wiring, and ensuring a secure connection.
6. Are there any tips for preventing the P1335 code from reoccurring in my 1999 Toyota Camry?
- To prevent the code from reoccurring, it's essential to regularly inspect and maintain the crankshaft position sensor, replace it at recommended intervals, and address any wiring issues promptly.
7. Is it possible to reset the OBDII code P1335 in a 1999 Toyota Camry without addressing the underlying issue?
- While you can clear the code temporarily, it will likely reappear if the crankshaft position sensor circuit fault is not properly diagnosed and repaired.
8. Can a faulty crankshaft position sensor cause other codes to appear in a 1999 Toyota Camry?
- Yes, a faulty crankshaft position sensor can cause other related codes to appear, such as P1336 (Crankshaft Position Sensor Range/Performance) or P1337 (Crankshaft Position Sensor Circuit Low Input).
9. How much does it typically cost to repair the crankshaft position sensor circuit fault in a 1999 Toyota Camry?
- The cost of repairing the issue can vary depending on the extent of the problem, but it generally ranges from $150 to $300 for parts and labor.
10. Will the check engine light turn off automatically after repairing the P1335 code in a 1999 Toyota Camry?
- In most cases, once the issue is properly diagnosed and repaired, the check engine light will turn off automatically after a few driving cycles if the fault is no longer detected.
Discuss the causes and fixes for P1335 1999 Toyota Camry OBDII Code
Code P1335 1999 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
